Search found 13 matches
- Sun Aug 11, 2019 3:20 pm
- Forum: Alloy Shop Talk
- Topic: Flooring from untrated wood and linseed oil
- Replies: 2
- Views: 7058
Re: Flooring from untrated wood and linseed oil
Yes, this is the topic I posted that seemed to have died off.
- Sun Aug 11, 2019 3:18 pm
- Forum: Alloy Shop Talk
- Topic: Fixing severe pitting and holes on alu boat
- Replies: 24
- Views: 41689
Re: Fixing severe pitting and holes on alu boat
In the discussions above I got the impression that trying to weld on the corroded areas would be unwise and the corroded area is too large to cut out. Any idea about the etching?
- Sat Aug 10, 2019 8:14 am
- Forum: Alloy Shop Talk
- Topic: Flooring from untrated wood and linseed oil
- Replies: 2
- Views: 7058
Flooring from untrated wood and linseed oil
Hi had a thread on this subject that died off so I'm trying agin with a clearer question.
Im looking to build a cheap floor and I'm now considering a bit thicker untreated wood planks that I paint with linseed oil to give some protection.
Could this have any bad effects on the aluminium?
Im looking to build a cheap floor and I'm now considering a bit thicker untreated wood planks that I paint with linseed oil to give some protection.
Could this have any bad effects on the aluminium?
- Sat Aug 03, 2019 3:47 am
- Forum: Alloy Shop Talk
- Topic: Fixing severe pitting and holes on alu boat
- Replies: 24
- Views: 41689
Re: Fixing severe pitting and holes on alu boat
Hi! some follow up here. I have now washed, brushed, drilled out, etched and filed the holes with marine glue goop =) I just have a question regaring the acid etching. I have done acid etching on the area around the holes where I used the glue, to get a good surface gripp. Now it dawns on me, should...
- Thu Aug 01, 2019 2:20 pm
- Forum: Alloy Shop Talk
- Topic: Building floors from larch wood
- Replies: 7
- Views: 11442
Re: Building floors from larch wood
Ok, so I have made some searches on the forum and I can see that there are more people that have had bilge corrosion problems possibly from treated wooden floors. So as we discussed in other threads this is likely to be my problem. The threads I found seem however to be about treated wood. So Im loo...
- Sat Jul 13, 2019 3:24 am
- Forum: Alloy Shop Talk
- Topic: Building floors from larch wood
- Replies: 7
- Views: 11442
Re: Building floors from larch wood
Ok, I'm sorry if I'm offending people on this forum. It's not my intention. The floors on my boat was previously treated wood, probably with copper, that probably caused corrosion. Because of this I decided to build a new floor of untreated wood. Larch is untreated, but naturally resistant to rott. ...
- Fri Jul 12, 2019 3:28 pm
- Forum: Alloy Shop Talk
- Topic: Building floors from larch wood
- Replies: 7
- Views: 11442
Re: Building floors from larch wood
Ya I guess that would be a ok project, but I dont want to spend much money on this boat and I have already bought larch and cut it to pieces. If larch is a no go I think I just put down a bit thicker untreated wood.
What do you think? Anyone know if larch is a problem?
What do you think? Anyone know if larch is a problem?
- Fri Jul 12, 2019 2:02 am
- Forum: Alloy Shop Talk
- Topic: Building floors from larch wood
- Replies: 7
- Views: 11442
Building floors from larch wood
Hi, I have a small open alu boat. I have had som problems with corrosion in the bilge and with som e help of this forum, we suspect its from the floors being built from treated wood containing copper. The copper has then been washed out with the rain and caused galvanic corrosion. Im no building new...
- Sun Jun 23, 2019 3:37 pm
- Forum: Alloy Shop Talk
- Topic: Fixing severe pitting and holes on alu boat
- Replies: 24
- Views: 41689
Re: Fixing severe pitting and holes on alu boat
Ok so no I should not re etch once I fixed the holes, kinda make sense.I there any good way of doing the repairs in two steps? My plan was to first fill the holes to get some boating this season and then do the epoxy coating of the bilge in the autumn. Should I just try to clean it out with brushed ...
- Wed Jun 19, 2019 5:21 pm
- Forum: Alloy Shop Talk
- Topic: Fixing severe pitting and holes on alu boat
- Replies: 24
- Views: 41689
Re: Fixing severe pitting and holes on alu boat
You are a god sent =) Ok I’’l think I do like this please tell me if I’m making a misstake. Im planing on doing in it two separate parts. First to get something out of this season I’ll fix the holes, then in autumn do the full epoxy coating. So for fixing the holes. 1. Clean the entire bilge with a ...
- Tue Jun 18, 2019 5:11 pm
- Forum: Alloy Shop Talk
- Topic: Fixing severe pitting and holes on alu boat
- Replies: 24
- Views: 41689
Re: Fixing severe pitting and holes on alu boat
Ok, so summing up Clean out with brush, sand blast, then also soda blast? and then a epoxy coating. You mention acid etching, should that be done after blasting and before coating? About the existing holes, what would be the suggestion for plugging these? expoxy? durafix soldering? About the reason ...
- Sun Jun 16, 2019 3:22 pm
- Forum: Alloy Shop Talk
- Topic: Fixing severe pitting and holes on alu boat
- Replies: 24
- Views: 41689
Re: Fixing severe pitting and holes on alu boat
Hi Im so sorry I have not responded. I forgot to turn on subscription on the topic and did not get any notifications. I have a bunsh of new topics and I will try to answer any questions. This is my first boat so bear with me I seem to know nothing. I dont, in this context =) Images of context attach...
- Mon Jun 03, 2019 2:14 pm
- Forum: Alloy Shop Talk
- Topic: Fixing severe pitting and holes on alu boat
- Replies: 24
- Views: 41689
Fixing severe pitting and holes on alu boat
So I got my first boat, a aluminium one, and now after one season, its leaking. I tore up the floor to have a look and there is deep pitting and one smal hole in the “grooves” at the bottom of the hull. The brown hole in the middle left of the picture is about 2 mm. 20190603_115941.jpg Alot of posts...