AluminumAlloyBoats.com

Thank you.
That makes sense.

Every Jon boat I've seen had a green Zinc finish. Guess its enough to protect the metal. That green wears off. I have welded rivets, cracks, and replaced the rotten wood transoms with aluminum. Some of these sheet metal hulls spend decades neglected, abused, and used. I have seen corrosion in the t...

In Florida we have thousands if not hundreds of thousands aluminum jon boats sitting on carpeted trailer bunks. And pontoon boats. I have had a few dozen or so people looking to repair pontoons for pitting and galvanic corrosion, but only one or 2 jon boats. What makes these boats lives so long? I k...

This is my regular supplier of anodized pipe http://www.easternmetal.com/

And I use alro for everything else http://www.alro.com/locations/locationsmain.aspx

pipe http://www.alro.com/divsteel/metalsgrid ... etube.aspx

PC Right click - click "save image as" I save them in my picture folder, name it what ever you want. click the save button. Goto FB and post from your PC The only thing he left out was renaming the pic. You don't have to but you can. [BBvideo 560,340]http://www.youtube.com/watch?v=QqQ0ghRc...

"Theoretically out of a 130liter tank I should have a range of over 300 miles."
130liters = 34.3424 US gallons

Chaps wrote:

gandrfab wrote:Honda has paint sticking to many plastic parts on cars.?

Apparently the car guys and the marine guys don't talk to each other. My 225's did the same thing, so did my 90

They should have a get together

You mean that lower cowling? Yeah, its hard to get paint to stick, even Honda hasn't figured it out . What you can do is strip all the old paint, scuff it up with 150 sandpaper, wipe it down with acetone, prime it with 3M #94 primer, paint with Honda rattle can motor paint, thin coats let dry betwe...

Tho that was impressive you need a bit more practice.
Here is a few lessons...
[BBvideo 560,340]http://www.youtube.com/watch?v=iDnEkFSMRik[/BBvideo]

Thanks, kmorin.

Hotdamn is easy to use so far.

"If you have a notebook or laptop computer:

You should visit the website of the notebook manufacturer to download the latest driver."

Currently updating from Toshiba. (need a cross fingers smilie)

What I'm getting this time. "Sorry you just crashed! We believe the crash you experienced is caused by the ATI graphics card driver you are using. Try re-installing the ATI driver or getting the latest driver from AMD's website." I'm feeling computer illiterate, going along with my regular...

Thanks. After watching some tutorials for Sk'up it looks like what I would like to try. I haven't been able to find out if I have problems using the tools. My experience so far. Downloaded - chose a template - clicked start using and it crashes Uninstalled - reinstalled - restarted computer - chose ...

Is this it?
http://www.youtube.com/watch?v=WGS2C01v ... ture=share

I tried Google sketch, I can't seem to get it to work.
Any other suggestions for a program to draw a BBQ/smoker.
Steel work but still work.

Thanks, Matt

Can you connect an airline to the pick up or vent hole?
Have some air flow to push the chips out, don't forget eye protection.
You can't stop all the chips, "some chips in the tank won't get past any filters . . ."

The first thing you have to do to weld these in is sand off the anodizing. Kind of defeats the purpose.So I would just go over to the rack of aluminum, pick out a piece of pipe, cut it on the chop saw and weld it to the boat with a doubler plate. You should be able to find a liner that will fit a s...

If I already had everything else..(which is looking like that will never happen)........ why not?

Peezer wrote:time to put a 10hp honda on it and watch it fly

Next test should be a 15 hp Yamaha. 2 stroke