AluminumAlloyBoats.com

Interior paint is done, interior non-skid is next then all tape and paper removed.
Rigging and wiring start next week.

Checked on boat last week -

Welding is 99% done, interior ready for surface prep prior to Mascoat DTM & Zolatone.
Interior paneling & trim work, electrical wiring after interior coating(s) are done.

Welding is basically done, gluing in all the wood strips, soon ready for interior painting.
Then on to wiring, interior fit-out, etc.

Lots of progress this week -
Cleats, handrails, chocks all getting finished up.
Settee area, galley, seat boxes welded in place.

At Crozier this past week for final seat placement.
Fo'csle storage area coming along nicely, metal work should be wrapped up by end of next week.

Labor and materials for the hull & structure is around $100K

Labor and materials for the electrical, electronics, tankage, heater & stove, Yamaha F350, etc. is around $100K

Plus Naval Architect fee, trailer and all the other misc. items that come up is around $40K

Lots of detail work this week, going out next week for seat placement, etc.

Dash / console progress, single Garmin MFD with "square" Yamaha gauges going on the right side.

Stand-up head coming along nicely.

End of week progress -

A boat with a variable deadrise hull, as you pointed out many posts ago!

I'll be going to check on progress again next month - it's mind numbing all the decisions that
have to made when building a custom designed and built boat.

From Friday, starting to work on interior fit out, console mock-up, H2O / Diesel / BW tanks going in soon.

Who and where was it built?

Hull form and bracket extension look very similar to Crozier and LeeShore, looks like the same NA drew yours also.

I've noticed some uploaded photo's have a yellow triangle at the far right hand side of the "attachment" box / page - they will not upload, why they have that triangle I have no idea. If your photo's have a green dot at the far right hand side they will show up. Maybe someone on the forum ...

A few more -

"Operator error" was the culprit for lack of photo's over the last few weeks, back in action again.

From last week -

Was this tank "foamed in" to the rest of the boat?

Boat is coming along nicely, aft deck and cabin deck are on, starting on the cabin. Going out to see the boat in a couple of weeks - looking forward to it! Jon I cannot get photo's to post but Chad has a lot on his Facebook page. Go to www.croziercraft.com and click the Facebook link in the upper ri...

Hull is rolled over, fuel tank is finished, starting topside work.

I'll try to get photos up today, having problems getting the attachment(s) into the message for some reason.....

Lift strips on, lots of welding ahead, probably mid September for hull rollover.

Fuel tank coming along.

End of week progress.

Next week or two - weld the Lift Strips, finish the bracket and then a lot of welding on the hull before it gets rolled over.

Plating has begun.

Still planning on F350's for power or the new Zuke 350 duo-prop?

Chaps - you have a sharp eye!

20 degree at transom, 26 degree at helm, 50+ degree at bow.

Should have some more photo's by end of the week.

Construction has begun, more photo's as the build progresses.

Any pics you have would help a lot.