Time for virgin boat and bottom paint
Replies: 4
by
Aluminum Clone Owner »
Tue Oct 24, 2017 7:31 am
This topic was posted 2368 days ago
First post
I am finally ready to get this done! :gunner2:
Last post
Generally, long term success when it comes to bottom paint on any boat is all about how the hull is prepped. Get that right and then get a good...
4 Replies
8039 Views
Last post by Chaps
Sun Oct 29, 2017 5:55 pm
Attaching Cushions To Aluminum Seats
Replies: 3
by
ehsvp »
Tue Oct 24, 2017 9:31 am
This topic was posted 2368 days ago
First post
I've fabricated the interior seating for my boat out of aluminum that was left over from the water jet cutting process. The seats will have storage...
Last post
the welting is sewn into the cushion and one of the tracks on the bottom of the page is attached to the boat and cushion is slide in place.
3 Replies
5880 Views
Last post by welderbob
Sat Oct 28, 2017 6:09 pm
Oil as corrosion prevention in bilge?
Replies: 7
by
skypoke »
Thu Jan 26, 2017 11:15 am
This topic was posted 2639 days ago
First post
I've got my 28' powercat on the bench for some refreshing. Due to a failed partnership, the boat sat at ex partner's place for a couple years,...
Last post
Well, everybody has their own secret sauce, and as Kevin says, the ACF50 is well proven in aircraft use. That said, I'm sticking with the LPS 3 as it...
7 Replies
8978 Views
Last post by skypoke
Sun Oct 22, 2017 9:31 am
Has Anyone Installed A Macerator Pump In A Bilge
Replies: 1
by
ehsvp »
Fri Oct 06, 2017 8:51 am
This topic was posted 2386 days ago
First post
Hi, I'm interested in finding out if anyone has installed a macerator pump in the bilge of their boat. I have a fish box which is under the deck that...
Last post
Get a Whale Gulper pump. No macerator head to get screwed up and can be mounted higher than fish boxes. Google it & watch the vids
1 Replies
4149 Views
Last post by Chaps
Sat Oct 07, 2017 10:19 pm
ACB 2008 30' military model
Replies: 5
by
Piratesteve »
Thu Aug 03, 2017 9:26 pm
This topic was posted 2450 days ago
First post
Just purchased this boat from gsa auction twin etec 2012 250's, 2011 trailer. I want to build the pilot house on the front and do something with the...
Last post
Steve
5 Replies
6595 Views
Last post by RCSO
Wed Sep 20, 2017 7:21 am
Miller 350P Aluminum Welder for rent...
by
alumioforte »
Sat Sep 02, 2017 7:50 pm
This topic was posted 2420 days ago
Beautiful machine! I realized i posted my other ad in the wrong section..
0 Replies
4619 Views
Last post by alumioforte
Sat Sep 02, 2017 7:50 pm
Modified Cope 36' Patrol boat build thread
Replies: 38
by
ReelSong »
Sun Jun 15, 2014 4:30 pm
This topic was posted 3595 days ago
First post
So here goes nothing, Unwrapped 10,000 lbs of aluminum, and started sorting last week. waiting for I beam for jig frame so started on pilot house...
Last post
Nope, doing the math, I think I have to stick to the 300 Yammies, just dont want to deal with the 350's economy and issues. I think 600 hp will be...
38 Replies
40080 Views
Last post by ReelSong
Fri Aug 18, 2017 1:15 pm
Work boat and paint over a soildly bonded existing but worn paint surface
Replies: 4
by
Sobie2 »
Mon Jun 26, 2017 1:24 pm
This topic was posted 2488 days ago
First post
I have a 1998 painted aluminum landingcraft from Harbercraft boats. It has a ton of dents and paint scratches on it. I have been in the process of...
Last post
Chaps, that is what the primer droplets on the old paint looked like- paint remover- the old paint crinkled up just like stripper- it kind of bubbled...
4 Replies
6575 Views
Last post by kmorin
Thu Jun 29, 2017 2:50 pm
0 Replies
3806 Views
Last post by Steve the Brain
Sat Jun 10, 2017 10:39 am
Painting aluminum: preperation details
Replies: 5
by
kmorin »
Thu May 11, 2017 1:18 pm
This topic was posted 2534 days ago
First post
I'm writing, again, about painting aluminum because I've recently been involved with a friend's airplane paint job. While a plane is mostly 2024...
Last post
Good stuff, thanks
5 Replies
6169 Views
Last post by Chaps
Tue May 16, 2017 2:22 am
BAYRUNNER KEEL WATER
Replies: 9
by
Ddrsuz »
Wed Apr 19, 2017 5:26 pm
This topic was posted 2556 days ago
First post
I have a 20'-6 Bayrunner. 1985 or so. After a day of running the transom drain shows no water. However, there is an aluminum member the length of the...
Last post
Wow, a man with 2 Bayrunners, u must be royalty. Bet u will have some action on the sale.
9 Replies
8268 Views
Last post by Ddrsuz
Tue May 02, 2017 7:57 pm
Chine and transom cracking
Replies: 4
by
Sobie2 »
Wed Mar 29, 2017 6:24 pm
This topic was posted 2577 days ago
First post
I have a 22' Harbercraft landing craft that has had seen some very hard use. It is a fully painted hull and I think it is a 1996 vintage. Close...
Last post
Those hand held drum sanders do a real nice job. Depending on the brand they either use an inflatable drum or the drum is built like a flap sanding...
4 Replies
6134 Views
Last post by Chaps
Wed Apr 05, 2017 9:18 pm
Vinyl wrap
Replies: 1
by
ReelSong »
Wed Feb 15, 2017 5:38 pm
This topic was posted 2619 days ago
First post
With todays new high tech vinyl wraps, has anyone had any expieriance with wrapping an alloy boat? pro's, Con's , any idea what prep needs to be. I...
Last post
A lot of alloy boats come through my shop and I see quite a bit of vinyl on hull sides. For the most part it seems to hold up better than paint. It...
1 Replies
4279 Views
Last post by Chaps
Thu Feb 16, 2017 11:35 am
Guide boat build into a pilot house. Cant wait!
Replies: 18
by
Crowsridge »
Sun Jan 15, 2017 2:54 pm
This topic was posted 2650 days ago
First post
I searched for a guide style boat for two years and stumbled upon this boat. IMG_0063.JPG IMG_0072.JPG So I dragged her home....
Last post
This section is the center beam of the pilot house. 6'6 headroom there. 20151208_162902_opt(R2).jpg
18 Replies
12707 Views
Last post by Crowsridge
Wed Feb 01, 2017 6:03 pm
Robotics not all that far away!
Replies: 16
by
kmorin »
Tue Dec 09, 2014 5:26 pm
This topic was posted 3418 days ago
First post
I've welded for along time and lifted and carried to get metal ready to weld, so in my 60's I'm not all that spry or ready to tote a welding torch...
Last post
Skypoke, a close friend and long time shop owner/welder/fabricator and I were having a similar discussion and it became apparent that he had little...
16 Replies
12686 Views
Last post by kmorin
Sat Jan 28, 2017 3:32 pm
Pre-fab extended transom and Cuddy
Replies: 1
by
kaelc »
Wed Jan 25, 2017 2:03 pm
This topic was posted 2640 days ago
First post
Has anyone had an extended transom prefabricated at a shop and then welded it on themselves?
Last post
There are several shops in Port Angeles that could help you out
1 Replies
3846 Views
Last post by Chaps
Fri Jan 27, 2017 9:59 pm
Zodiac RIB
Replies: 4
by
gandrfab »
Wed Dec 21, 2016 12:55 pm
This topic was posted 2675 days ago
First post
Is it worth repairing the inflatable or getting a new inflatable for the hull.
Last post
Pictures?
4 Replies
4817 Views
Last post by welder
Fri Dec 30, 2016 8:39 am
The pros and cons of powder coating
Replies: 2
by
alumioforte »
Tue Dec 20, 2016 1:04 am
This topic was posted 2676 days ago
First post
This is a helpful article i thought I would share, being that this is a highly discussed and often controversial topic...
Last post
alumioforte,
2 Replies
3997 Views
Last post by kmorin
Wed Dec 21, 2016 2:20 pm
FishMissHayden
by
AlloyToy »
Fri Dec 09, 2016 11:12 am
This topic was posted 2687 days ago
Lets see some of the new boat you are building :thumbsup: :idea:
0 Replies
4705 Views
Last post by AlloyToy
Fri Dec 09, 2016 11:12 am
25' Wooldrige gets powder coated
Replies: 4
by
alumioforte »
Sun Nov 27, 2016 8:21 pm
This topic was posted 2699 days ago
First post
Some pictures of my 25' Wooldridge in various phases of the powder coating. Stem to stern refit- absolutely amazing what a transformation the powder...
Last post
Its called Epoxy DuraPrime, Marine Grade. It has the zinc omitted from it, a lot of prior powder coated stuff had zinc in the primer (that helps...
4 Replies
5041 Views
Last post by alumioforte
Tue Nov 29, 2016 11:35 pm
floor hatch extrusions
Replies: 5
by
Tfitz »
Mon Oct 17, 2016 3:27 pm
This topic was posted 2740 days ago
First post
If I wanted to build hatches like this into my boat floor what is this perimeter drain channel called? Or is it just angle that you weld together...
Last post
Tfitz, I ended up with a design project in the works- and this includes deck hatches. The shape of the gutter/coaming should be sketched in cross...
5 Replies
6598 Views
Last post by kmorin
Mon Oct 24, 2016 2:01 pm
Boat mod help?
Replies: 6
by
RogueFanatic »
Tue Sep 20, 2016 4:10 pm
This topic was posted 2767 days ago
First post
The time has come for the Salmon Master (19' JetCraft) to become a more practical fishing vessel. I have decided to look into removing the carpet...
Last post
Rogue, I'd recommend you rethink the diamond/embossed plate idea. In my experience, it is not a good decking material choice. A better choice would...
6 Replies
6026 Views
Last post by kmorin
Sat Sep 24, 2016 1:16 pm
Extended Transom
Replies: 11
by
SuperYeti »
Sat Sep 17, 2016 2:51 pm
This topic was posted 2770 days ago
First post
Hey all, first time poster here. I've decided to build an extended transom for my 16' welded aluminum fishing boat, here's a couple pictures of it:...
Last post
kmorin, again awesome advice, thank you. After I speak with the hull designer next week hopefully, I think I'm ready to start CADing the project up....
11 Replies
10744 Views
Last post by SuperYeti
Wed Sep 21, 2016 12:25 am
aluminum suppliers?
Replies: 9
by
bigfun »
Tue Jul 05, 2016 1:18 pm
This topic was posted 2844 days ago
First post
Hello, I'm going to build a 17' foot boat and am having difficulties finding a supplier that will sell me 6' x 18' sheet.
Last post
Update. Was able to get an order via ryerson steel. Not exactly what I wanted but will work. Thanks for your replys.
9 Replies
7226 Views
Last post by bigfun
Wed Jul 20, 2016 4:07 am
a good product to line the interior of the boat's alloy cabin...
Replies: 1
by
lwb44 »
Sun May 15, 2016 11:32 pm
This topic was posted 2894 days ago
First post
I've actually fabricated an aluminum extension from the cabin to cover the entire fishing deck of my Hewescraft 220 Searunner. I would like to glue a...
Last post
lwb44, sorry to have missed this post and not offered even an acknowledgement! I guess I just didn't see the link so please accept my apology for not...
1 Replies
3328 Views
Last post by kmorin
Mon Jul 18, 2016 4:17 pm
Forum permissions
You cannot post new topics in this forumcannot reply to topics in this forumcannot edit your posts in this forumcannot delete your posts in this forumcannot post attachments in this forum
