Hello! I just wanted to say I love the platform and the enthusiasm for all things aluminum! We have a small and growing shop in Anacortes, Washington...
Last post
Here is a simple little skiff. I originally designed this one up for my dad to go pick up Dungees. At the time he was 70 something, hauling a 8'...
Changing bunks on the trailer today and found alot of corrosion pitting on the bottom of the boat today always herd this problem with bayrunners any...
Last post
Are you bunks made of pressure treated wood by chance? I've been told that can cause pitting on the hull. It's a reaction to the chemicals in the...
I own a 20 foot aluminum hull coated with epoxy, a primer, and Trilux 2. I believe TL2 is now banned in Canada. That's fine, I want to get away from...
Hi everyone, new to the site and new to owning an aluminum boat. I was wondering if anyone has tried using rockwool insulation? It doesn’t get...
Last post
As a geo type I don' think that rock wool is a good companion to have next to aluminum, especially with salts and water around. Many of the minerals...
I am giving serious consideration to ordering a WeldCraft 18 ft Angler. However, there are a couple of things that give me pause:
1. I primarily fish...
Last post
Nothing on this boat or similar models (i.e. Duckworth 18 ft)? Need to make a decision in January if I want it for the spring? Thank you!
Hi all - not trying to start a brand war but I can't find much on scale of ride difference between manufacturers in the 22' to 28' size trailerable...
Last post
Next is tabs, flat/flap tabs are some pretty heft drag to do what we're discussing in regards trimming the bow down for a long run- Bennett (brand &...
7 months after delivery, I acid etched my hull, fish boxes and anchor locker. Put some uhmw strips on...
Last post
Spark,
usually acid is sprayed onto a hull from the bottom up - so the foam has already lifted scale and contaminants lower down - then when foaming...
Hi,
You can see from the attached pictures that our little Gregor boat was squished by a falling tree. Before I haul it off for scrap metal I though...
Last post
Hi Rich
If you do decide to scrap it I know a guy living on Gambier Island that would be very happy to take it for scrap value and bang it out. He...
Anyone with experience on both a Stabicraft and a Pacific Skiff?
-trying to decide between a stabicraft 2050, 0r 2250 ultra center cab and a Pacific...
Last post
I guess it depends if sooner than later timing is important to you and if the boats you are looking at are already built, and residing in the USA. If...
Hello everyone,
Thanks to those who contribute to the greater knowledge of all.I have found a wealth of information on how to deal with my issue and...
Last post
I'm curious if you've resolved your issue Skiff of Knowledge. I have the same boat with a very similar issue. I have not found anything wrong with...
First of all, I stumbled across this forum while trying to learn about my 2019 Silver streak issue....what a great site with a wealth of information!...
Last post
Trilux contains copper thiocyanate, a galvanically less aggressive form of copper, its the same biocide as used in Vivid. Both can be safely used on...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
