General boating discussion
Fraser River, Vancouver, BC
Replies: 2
by
JREX »
Wed Oct 01, 2008 10:57 pm
This topic was posted 5690 days ago
First post
Hello everyone... Wondering if any of you guys have had any thoughts or experience with this situation. I am planning on mooring my new aluminum boat...
Last post
This is a pretty good article that talks about your type of situation.
Welcome to the forum BTW. Tell us about your new boat!
2 Replies
2656 Views
Last post by Chaps
Fri Oct 03, 2008 9:40 pm
Should I strip paint off my 23' Monark Vee Hull Cabin boat?
Replies: 47
by
85MonarkVC »
Fri Aug 01, 2008 2:40 am
This topic was posted 5752 days ago
First post
Hello Everyone,
I am a new member. I just bought this 1985 Monark deep vee hull cabin boat, motor, and trailer off Craigslist for $6000.00. It was a...
Last post
Hi Marty:
Thanks for saying so. They did both the repairs and paint on site in Montecello, AR. They sand (or shell blasted or whatever)
blasted...
47 Replies
27958 Views
Last post by Illgotoo
Sun Sep 28, 2008 11:29 am
well my search for a bigger hull has ended for now
Replies: 17
by
larrybayrunner »
Wed Sep 17, 2008 2:17 pm
This topic was posted 5704 days ago
First post
I have been looking to upgrade my 15 hull lately to an 17-18 foot bayrunner, klamath deep v boat. The search continues. seems it will never end..
I...
Last post
You're killin' me!
Believe me, there is no shortage of wind here. We have 20kt winds almost every afternoon. If I had a dime for every time some...
17 Replies
8625 Views
Last post by Merlin
Fri Sep 19, 2008 9:45 pm
Adding a 3-sided cabin to 24 foot landing craft
Replies: 4
by
djdew »
Tue Sep 16, 2008 11:43 pm
This topic was posted 5705 days ago
First post
Hello all;
I usually just lurk on these forums but there is so much expertise here that I am motivated to ask a few questions. Hopefully I can...
Last post
On my boat, the offset cabin is the way to go. Otherwise the cabin would be too small, and the walkways down the sides would be too narrow.
With a...
4 Replies
3525 Views
Last post by BrianW
Thu Sep 18, 2008 12:59 pm
Adding non-skid to my Pacific.
Replies: 9
by
v26wa »
Mon Sep 15, 2008 3:46 pm
This topic was posted 5706 days ago
First post
My swim platform has non-skid on one side . I would like to add some to the other side (of the engines). My ? is how to apply it & what product to...
Last post
Oh I knew that was the reason for that side not having it.
Hell the deck will shine and de-traction a pair O' CROCS in a matter of a few weeks...
9 Replies
4339 Views
Last post by JETTYWOLF
Thu Sep 18, 2008 10:48 am
Leaky 14 foot semi-v
Replies: 10
by
Bfishy »
Sun Sep 14, 2008 6:35 pm
This topic was posted 5707 days ago
First post
I have a 14' semi-V aluminum boat. When I got it, it didn't leak at all. It had fresh paint and through dragging it over sandbars and not having a...
Last post
About by July, I'm sick of summer and still have 3 months more of it.
I gotcha. I too have lived other places as a kid, but as an adult here.
I'm...
10 Replies
4599 Views
Last post by JETTYWOLF
Mon Sep 15, 2008 4:50 pm
Best topside paint? Method?
Replies: 4
by
mitchk »
Fri Sep 12, 2008 1:32 pm
This topic was posted 5709 days ago
First post
My 26' islander has the factory paint on it. Its in decent shape but could use a revisit. I'm intending to repaint the existing painted area which is...
Last post
New members are asked to please fill out your profile page , with your location.
Good luck with the paint job.
4 Replies
3205 Views
Last post by JETTYWOLF
Sun Sep 14, 2008 9:12 pm
nice aluminum trailer for 26 BL
Replies: 13
by
FishMagnet »
Thu Aug 21, 2008 10:02 pm
This topic was posted 5731 days ago
First post
Any recommendations for this? Would like LED lights and built well.
thanks
Last post
Marty , you should see XSHARK in person , OH MAN , she is sweet .
I think Bobby is sick , man you could eat off of his trailer and his truck matches...
13 Replies
6497 Views
Last post by welder
Sun Aug 24, 2008 8:11 pm
Another bottom paint question
Replies: 3
by
v26wa »
Sat Aug 23, 2008 9:05 pm
This topic was posted 5729 days ago
First post
I know we discussed this before but I would like some additional info. I will be pulling out early this year (Oct.) to get a jump start on bottom...
Last post
CHAPS,
Cool rig, wish I had a back yard again. I would buy a triple or quad wheel alloy trailer and make one of those rigs for my big girl. I'll...
3 Replies
3567 Views
Last post by Ironwoodtuna
Sun Aug 24, 2008 12:07 pm
kobelt systems
Replies: 3
by
FishMagnet »
Thu Aug 21, 2008 5:31 pm
This topic was posted 5731 days ago
First post
Dave,
Thanks for your time on the phone. I see that I need to lower those protective chines about 6 for floating docks. Also, went to the kobelt...
Last post
You might be able to save by gasketing or spraying it yourself with
a clear coat. Is what I meant.
Oh how I would love to catch a GATOR, right now.
3 Replies
2781 Views
Last post by JETTYWOLF
Sat Aug 23, 2008 7:38 pm
Should you isolate stainless steel ?
Replies: 31
by
v26wa »
Sat Mar 29, 2008 8:28 pm
This topic was posted 5876 days ago
First post
I'm gonna add a few things here & there & was wondering if its ok to use SS hardwear w/o insulation. Thanks!!
Last post
Great info! Thank you for posting it. I like the sleeve idea on the stainless bolts. I've also heard that 316 is the kind of stainless that you want....
31 Replies
13512 Views
Last post by 85MonarkVC
Tue Aug 19, 2008 10:28 pm
View active threads down?
Replies: 3
by
Bullshipper »
Sun Aug 17, 2008 10:48 pm
This topic was posted 5735 days ago
First post
no new threads all day. hard to believe. is the search function working?
Last post
That function has not been working well for me lately. Several instances of error messages, particularly last week. Working OK now however.
3 Replies
2689 Views
Last post by Chaps
Mon Aug 18, 2008 7:20 pm
MARINE TEX GLUVIT OR COAT IT
Replies: 2
by
sushiking »
Sat Aug 09, 2008 2:21 am
This topic was posted 5744 days ago
First post
Iam thinking about coating the bottom of my boat with GLUVIT OR COAT IT to seal the corosion pitting i am getting and extend the life of the bottom...
Last post
Yep....that doesn't sound good. Hmmm, thats a real pickle.
A couple coats of just good epoxy paints wouldn't be enough?
2 Replies
2742 Views
Last post by JETTYWOLF
Sat Aug 09, 2008 7:50 pm
Silver Ships workboats
Replies: 8
by
Challenge »
Tue Jul 08, 2008 8:41 pm
This topic was posted 5775 days ago
First post
Hi Folks,
One of these was putting in a dock near me. They are pretty impressive boats!
Have Fun!
Rick
Last post
This one works for a charter client of mine here in Jacksonville Fl as his survey boat.
It's rather old, I think he told me 1985???
But looks...
8 Replies
4647 Views
Last post by JETTYWOLF
Thu Aug 07, 2008 4:43 pm
20' Pacific/BL performance numbers?
Replies: 20
by
Bullshipper »
Sat Jul 12, 2008 11:40 am
This topic was posted 5771 days ago
First post
The 23 gets 5 mpg at cruise. Is the 20 even better?
If anone has any cruise rpms/speed/gph and the same thing for full throttle on the 20 footer I...
Last post
Guys have you checked out this site. Trial run props buy the one that works. Prop calculator. Ken sounds very informative.
Have fun
Mark
20 Replies
9846 Views
Last post by mojomizer
Tue Jul 29, 2008 2:18 am
Fuel tanks
Replies: 4
by
fowlwaters »
Thu Jul 24, 2008 8:27 pm
This topic was posted 5759 days ago
First post
Looking at some mud boats that have a built in fuel tank up front on the bow and wandering if the same alloy is used that the hull was made out of or...
Last post
The fuel tanks that West Marine sells are made out of 5052. Stephen Pollard's book states that tanks must be a minimum thickness of .090.
4 Replies
3157 Views
Last post by keith
Fri Jul 25, 2008 7:11 pm
Larger boat builders?
Replies: 5
by
CanCanCase »
Tue Jul 22, 2008 11:37 pm
This topic was posted 5761 days ago
First post
I'm looking to begin construction on something bigger... SeaWolf can't/won't build anything much bigger than I've already got, so now I have to look...
Last post
But on over, what is it 12 hour trips there's supposed to be a 2nd Captain on board? :lol: :lol:
is that an ice berg :shock:
OH, if I was 18...
5 Replies
3709 Views
Last post by JETTYWOLF
Thu Jul 24, 2008 10:31 am
23 ft pacific cc good boat?
Replies: 4
by
fflane »
Tue Jul 22, 2008 9:36 am
This topic was posted 5761 days ago
First post
I am looking at buying a 23 ft. pacific cc for gulf of mexico offshore fishing. I know nothing about the boats. Looking for insight on everything,...
Last post
Thanks for the talk today , and you guys are welcome any time to come up and play.
4 Replies
3215 Views
Last post by welder
Wed Jul 23, 2008 7:49 pm
Who keeps their alloy wet slipped or moored ?
Replies: 10
by
v26wa »
Tue Feb 12, 2008 9:24 pm
This topic was posted 5922 days ago
First post
Any pointers on an alloy boat. I have owned 12-15 glass boat but am an alloy newbie. I plan on inspecting the zink often & beaching the boat to clean...
Last post
Hmm... I've had my same bottom paint since 2002, and the Can Can has been in the water year-round the whole time. Never had to re-paint, change zincs...
10 Replies
6118 Views
Last post by CanCanCase
Tue Jul 22, 2008 11:30 pm
Does anyone make..........
Replies: 7
by
AlloyToy »
Mon Jul 21, 2008 7:28 am
This topic was posted 5763 days ago
First post
A dual console (fishing style) welded alloy boat in the 23-26 foot size range????
Last post
Nice find Mac......Not impressed wit the Stanley boats but they do make a DC...........
7 Replies
4127 Views
Last post by AlloyToy
Tue Jul 22, 2008 4:50 pm
Who lives close to Oxnard, California??? Help needed.
Replies: 3
by
JETTYWOLF »
Sat Jul 19, 2008 8:48 pm
This topic was posted 5764 days ago
First post
If you live close, enough to do a bit of Private ey e work, please contact me.
PM or email: charter@captdaves.com
I am having two custom rods...
Last post
My mom lives there, but she's 84.
3 Replies
2676 Views
Last post by Bullshipper
Sun Jul 20, 2008 8:43 am
Pacific with 4" of Draft
Replies: 13
by
Bullshipper »
Tue Jul 15, 2008 7:34 am
This topic was posted 5769 days ago
First post
This is interesting. Wonder if it has the 18 degree deadrise?
Last post
I can already feel my the wheels turning, Jay.
The flat bottom, sizes and simplicty has really big time inshore fishing skiff application here in...
13 Replies
5920 Views
Last post by JETTYWOLF
Sun Jul 20, 2008 8:26 am
Motor size...
Replies: 16
by
gil marlin »
Thu Jul 03, 2008 11:07 am
This topic was posted 5780 days ago
First post
I have a 1996 19' Bayrunner with a 55 Yamaha on it. I want to repower with a larger motor and can't decide what size to get. The hull is rated for...
Last post
I just looked at the Yamaha specifications, the 2-stroke is about 100 lbs lighter. Now, I looked at the specs on the 75 vs 90 as Rock suggested and...
16 Replies
7990 Views
Last post by gil marlin
Mon Jul 14, 2008 9:52 am
Green Ship's Ground Wire
Replies: 1
by
psaprop »
Sat May 31, 2008 11:05 am
This topic was posted 5813 days ago
First post
On alloy boats, is there any special way to hook up the green ship's ground wire on electronics equipment that have them? GPS/PLOTTER and SOUNDER....
Last post
Ground everything to the battery negative post.
1 Replies
2250 Views
Last post by gil marlin
Mon Jul 14, 2008 9:10 am
Who'll be #200?
Replies: 8
by
Jay Perrotta »
Thu Jul 10, 2008 7:40 am
This topic was posted 5774 days ago
First post
199 members......
Last post
SL DAVE,
I asked Jay the same thing ..... whats the big deal with having rails put on after the fact. And he said it's harder to do.
Actually two...
8 Replies
4204 Views
Last post by JETTYWOLF
Sat Jul 12, 2008 5:02 pm
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum