new member , question about electroysis
new member , question about electroysis
what are the most common causes of electroysis that causes holes to come in aluminum?
-
goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Location: Stanwood WA
Re: new member , question about electroysis
Welcome
Improper Electrical hook ups for your electronics and other devices.
Each component needs two wires to connect to the battery. The negative Wire CAN NOT be connected to the hull. Do not use the hull of your boat as the return path as you would do for your Car. Your boat will disintegrate if done improper.
Danger, Danger, Will Smith.
Fuse panels, Ground strips, Battery Shut Off Switches, Marine Tinned wire Adhesive coated heat Shrink, Dielectric grease, Tinned Connectors
there are a couple of good threads here to use as a reference for a proper setup for your boat.
Improper Electrical hook ups for your electronics and other devices.
Each component needs two wires to connect to the battery. The negative Wire CAN NOT be connected to the hull. Do not use the hull of your boat as the return path as you would do for your Car. Your boat will disintegrate if done improper.
Danger, Danger, Will Smith.
Fuse panels, Ground strips, Battery Shut Off Switches, Marine Tinned wire Adhesive coated heat Shrink, Dielectric grease, Tinned Connectors
there are a couple of good threads here to use as a reference for a proper setup for your boat.
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate