Propeller Selection

Motor discussion
Post Reply
Fisherman
Posts: 195
Joined: Tue Aug 02, 2011 8:24 pm

Propeller Selection

Post by Fisherman » Mon Aug 29, 2016 9:41 am

I need to select a different propeller since I repowered. Over the years I have seen conversations about reproping and that there are certain places that will help you with your selection and mail you different props to try, allowing you to return the props that did not work. I am coming up dry on my searches. Do any of you have any suggestions?

FYI, I am interested in a SS prop for a 150 hp ETEC mounted on a 20' aluminum.

User avatar
Gypseas
Donator 14, 15
Posts: 152
Joined: Sat Oct 22, 2011 12:23 am
Contact:

Re: Propeller Selection

Post by Gypseas » Wed Aug 31, 2016 11:21 pm


pimc
Posts: 2
Joined: Fri Sep 09, 2016 7:27 pm

Re: Propeller Selection

Post by pimc » Wed Oct 05, 2016 1:58 pm

OK, I run a SS prop on a 150 hp ETEC mounted on a 2050 Stabicraft aluminum boat.

For us, Stiletto 14-1/4" x 15" Advantage 4.75 is the Best Hands down...at our 300 service, we were informed that it was one of the cleanest runner motors they have seen (no black soot)...

The recommended WOT range for your motor is 4850 - 5850 RPM but the optimal range is 5500 - 5600 RPM and that is Very Important like for all motors to reach the Optimum RPM at full load !!!



Bob
[image][/image]
Attachments
IMG_6442.JPG

Fisherman
Posts: 195
Joined: Tue Aug 02, 2011 8:24 pm

Re: Propeller Selection

Post by Fisherman » Wed Oct 05, 2016 3:43 pm

Thanks, Bob! And welcome to AAB!

Post Reply