Propeller Selection

Motor discussion
Fisherman
Posts: 207
Joined: Tue Aug 02, 2011 8:24 pm
12

Propeller Selection

#1

Post by Fisherman »

I need to select a different propeller since I repowered. Over the years I have seen conversations about reproping and that there are certain places that will help you with your selection and mail you different props to try, allowing you to return the props that did not work. I am coming up dry on my searches. Do any of you have any suggestions?

FYI, I am interested in a SS prop for a 150 hp ETEC mounted on a 20' aluminum.
User avatar
Gypseas
Donator 14, 15
Posts: 154
Joined: Sat Oct 22, 2011 12:23 am
12
Contact:

Re: Propeller Selection

#2

Post by Gypseas »

pimc
Posts: 2
Joined: Fri Sep 09, 2016 7:27 pm
7

Re: Propeller Selection

#3

Post by pimc »

OK, I run a SS prop on a 150 hp ETEC mounted on a 2050 Stabicraft aluminum boat.

For us, Stiletto 14-1/4" x 15" Advantage 4.75 is the Best Hands down...at our 300 service, we were informed that it was one of the cleanest runner motors they have seen (no black soot)...

The recommended WOT range for your motor is 4850 - 5850 RPM but the optimal range is 5500 - 5600 RPM and that is Very Important like for all motors to reach the Optimum RPM at full load !!!



Bob
[image][/image]
Attachments
IMG_6442.JPG
Fisherman
Posts: 207
Joined: Tue Aug 02, 2011 8:24 pm
12

Re: Propeller Selection

#4

Post by Fisherman »

Thanks, Bob! And welcome to AAB!
Post Reply Previous topicNext topic