Page 1 of 1
Propeller Selection
Posted: Mon Aug 29, 2016 9:41 am
by Fisherman
I need to select a different propeller since I repowered. Over the years I have seen conversations about reproping and that there are certain places that will help you with your selection and mail you different props to try, allowing you to return the props that did not work. I am coming up dry on my searches. Do any of you have any suggestions?
FYI, I am interested in a SS prop for a 150 hp ETEC mounted on a 20' aluminum.
Re: Propeller Selection
Posted: Wed Aug 31, 2016 11:21 pm
by Gypseas
Re: Propeller Selection
Posted: Wed Oct 05, 2016 1:58 pm
by pimc
OK, I run a SS prop on a 150 hp ETEC mounted on a 2050 Stabicraft aluminum boat.
For us, Stiletto 14-1/4" x 15" Advantage 4.75 is the Best Hands down...at our 300 service, we were informed that it was one of the cleanest runner motors they have seen (no black soot)...
The recommended WOT range for your motor is 4850 - 5850 RPM but the optimal range is 5500 - 5600 RPM and that is Very Important like for all motors to reach the Optimum RPM at full load !!!
Bob[image][/image]
Re: Propeller Selection
Posted: Wed Oct 05, 2016 3:43 pm
by Fisherman
Thanks, Bob! And welcome to AAB!