STICK-ON PAD
STICK-ON PAD
The summer in the NW is coming to a close and I am not working 6 and 7 days a week...time to do some things to the boat and catch up on my AAB reading. Thinking about an anchor windlass and jack plate, but what I need to do right away is find this stick-on stuff.
I saw some of the manufactiures using a stick-on pad rubber gray black smooth trextured diamond patterned thin and thick soft hard cut with scissors knife peel and stick...you get the point! DOES ANYONE KNOW WHAT IT IS CALLED AND WHERE TO GET IT IN A ROLL OR SHEET?
I want to use it to line the alloy side shelves where my rods lay and aound the windlass on the foredeck when I get that project started.
Any help will be certainly appreciated...I called SAFE up here and they don't use it!
THX Capt PJ
I saw some of the manufactiures using a stick-on pad rubber gray black smooth trextured diamond patterned thin and thick soft hard cut with scissors knife peel and stick...you get the point! DOES ANYONE KNOW WHAT IT IS CALLED AND WHERE TO GET IT IN A ROLL OR SHEET?
I want to use it to line the alloy side shelves where my rods lay and aound the windlass on the foredeck when I get that project started.
Any help will be certainly appreciated...I called SAFE up here and they don't use it!
THX Capt PJ
2009 Raider 185 Pro Fisherman, 2005 90Yamaha, 2012 Yamaha9.9HT, 2008 EzLoader roller, 2004 Dodge TCD dually, 2005/2015 Lance1161
-
- Contributor/Donator '08
- Posts: 1205
- Joined: Sat Jan 12, 2008 4:38 pm
- 16
- Location: Orange County
Re: STICK-ON PAD
Hello Capt. PJ. If the area you plan on lining gets wet I do not know if I would use peel and stick.
Whenever I am looking for stuff I always look through a McMaster Carr catelog:
http://www.mcmaster.com/#standard-rubber-sheets/=jas2rp
http://www.mcmaster.com/#runners/=jasb8z
Even describes types of rubber sheets and their properties.
http://www.mcmaster.com/#standard-rubber-sheets/=jasdpt
Rubber sheets, rubber mats, rubber runners, traction mats, cut to size and lay it down. Hope this sends you down the right path
Whenever I am looking for stuff I always look through a McMaster Carr catelog:
http://www.mcmaster.com/#standard-rubber-sheets/=jas2rp
http://www.mcmaster.com/#runners/=jasb8z
Even describes types of rubber sheets and their properties.
http://www.mcmaster.com/#standard-rubber-sheets/=jasdpt
Rubber sheets, rubber mats, rubber runners, traction mats, cut to size and lay it down. Hope this sends you down the right path
Mark
2325 WA PACIFICSKIFF
2325 WA PACIFICSKIFF
Re: STICK-ON PAD
http://www.mcmaster.com/#antislip-floor-tape/=javl93
This maybe more what your looking for. I think I have used this one. Works better if you buy the edge sealer. By a small piece or roll.and try it.
Welderbob
This maybe more what your looking for. I think I have used this one. Works better if you buy the edge sealer. By a small piece or roll.and try it.
Welderbob
Re: STICK-ON PAD
There is much to read thru and sort out...thx for the links...you would have thought that the boat manufacturer that used this stuff would have replied...I just wish I could remember which one I saw it on at the boat show in Seattle. I wonder if was ACB? THX for the help, so far! PJ
2009 Raider 185 Pro Fisherman, 2005 90Yamaha, 2012 Yamaha9.9HT, 2008 EzLoader roller, 2004 Dodge TCD dually, 2005/2015 Lance1161
-
- Posts: 21
- Joined: Wed Aug 01, 2012 11:19 am
- 11
Re: STICK-ON PAD
Hi PJ
Rubber and aluminum should not go together and I'm never big on gluing strips or spaying thick coating on alum either.....seen too many things go on alum that cause electrolysis and then had to experience getting them off.
Take Care
John
Rubber and aluminum should not go together and I'm never big on gluing strips or spaying thick coating on alum either.....seen too many things go on alum that cause electrolysis and then had to experience getting them off.
Take Care
John
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Location: Stanwood WA
Re: STICK-ON PAD
John@ironwood. Start a thread and introduce yourself and tell us some more about your boats. Please
We like Porn to.
We like Porn to.
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
-
- Posts: 21
- Joined: Wed Aug 01, 2012 11:19 am
- 11
Re: STICK-ON PAD
Hey Goatram
My typing teacher in high school didn't see eye to eye with me so at 15 I was skipping after noon typing class and hanging around the boat yards....more than 30 years ago.
The boats can speak for themselves...the good and the bad.
Take Care
John
My typing teacher in high school didn't see eye to eye with me so at 15 I was skipping after noon typing class and hanging around the boat yards....more than 30 years ago.
The boats can speak for themselves...the good and the bad.
Take Care
John
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Location: Stanwood WA
Re: STICK-ON PAD
John it's not hard.
http://www.ironwoodboats.com/
Some good info there.
Plus we get to know who is dispensing advice
Plus we get to say Welcome Good Sir
http://www.ironwoodboats.com/
Some good info there.
Plus we get to know who is dispensing advice
Plus we get to say Welcome Good Sir
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
- StabicraftMarine
- Sponsor
- Posts: 86
- Joined: Mon Apr 12, 2010 8:16 pm
- 14
- Location: Invercargill, New Zealand
- Contact:
Re: STICK-ON PAD
We use a range from a company based here Ultralon. They heat stamp patterns in to closed cell foams and apply a 3M adhesive to the backing. We like it as its softer on hands, knees, ladies... In particular we use their Octitread witch is one of their more dense foams.
It is an NZ company which might make things a bit harder for you.
http://www.ultralon.co.nz/
We have had a sample set come in from Seadek (US company). They have a huge range, some very high density and some with good grip but at the moment the Octitread works best for us as it can be manipulated easily and offers good grip and durability. We use it round anchor and windlass areas on most boats. I'll pull up a picture of some.
Tim.
(Edited to add pictures)
It is an NZ company which might make things a bit harder for you.
http://www.ultralon.co.nz/
We have had a sample set come in from Seadek (US company). They have a huge range, some very high density and some with good grip but at the moment the Octitread works best for us as it can be manipulated easily and offers good grip and durability. We use it round anchor and windlass areas on most boats. I'll pull up a picture of some.
Tim.
(Edited to add pictures)
http://www.stabicraft.com
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
-
- Posts: 21
- Joined: Wed Aug 01, 2012 11:19 am
- 11
Re: STICK-ON PAD
Hi Gotram
I should get that web site updated.......someday. Some of the post here regarding the info on the web site are nasty....too bad.
I was reading the Comparing Hull post. The posts by Kmorin are excellent....always thought that I was building boats with bow flare. Now I know it is called flam. I consider there to be 5 aspects to a boat.
-Durability
-Use
-Ride
-Looks
-Cost
Each takes a different percentage base on what both the builder and the owner's needs are.
P.S. Your profile comment is great!! posting.php?mode=reply&f=3&t=4398# "Master of R&D aka Ripoff and Duplicate"
Take Care
John
I should get that web site updated.......someday. Some of the post here regarding the info on the web site are nasty....too bad.
I was reading the Comparing Hull post. The posts by Kmorin are excellent....always thought that I was building boats with bow flare. Now I know it is called flam. I consider there to be 5 aspects to a boat.
-Durability
-Use
-Ride
-Looks
-Cost
Each takes a different percentage base on what both the builder and the owner's needs are.
P.S. Your profile comment is great!! posting.php?mode=reply&f=3&t=4398# "Master of R&D aka Ripoff and Duplicate"
Take Care
John
Re: STICK-ON PAD
Tim, Thx for the lead...that is exactly what I am looking for! Sorry been awfully busy this last part of the season..the weather has been absolutely marvelous...I have my last runs this weekend...will explain in a new post. PJ
2009 Raider 185 Pro Fisherman, 2005 90Yamaha, 2012 Yamaha9.9HT, 2008 EzLoader roller, 2004 Dodge TCD dually, 2005/2015 Lance1161
- JETTYWOLF
- Contributor/donator/Location Nazi
- Posts: 6074
- Joined: Sun Jan 06, 2008 9:11 pm
- 16
- Location: Tree-hugger, USA...they call it FLA.
Re: STICK-ON PAD
WALMART......in the automotive section
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Location: Stanwood WA
Re: STICK-ON PAD
John we all have opinions and Holes. Kevin Has some great teaching abilities and he likes to share as I do. But I don't have his knowledge or expertise. Now for my signature. A friend bet me I would not put that in my signature here on AAB. He used to work at Northriver and Lost his Job when the SWMBO got wind of the DumbA$$ who thought he owned NR carrying on's. He is of the opinion that we all do that R&D that is.John@Ironwood wrote:Hi Gotram
I should get that web site updated.......someday. Some of the post here regarding the info on the web site are nasty....too bad.
I was reading the Comparing Hull post. The posts by Kmorin are excellent....always thought that I was building boats with bow flare. Now I know it is called flam.
P.S. Your profile comment is great!! posting.php?mode=reply&f=3&t=4398# "Master of R&D aka Ripoff and Duplicate"
Take Care
John
Capt PJ; sorry we Hyjacked your thread. I did learn from it though; about the Rubber (NoNo) and need to use a Vinyl/plastic instead. A guy on BD found Carpet under his fuel tank that the Manufacture put there. Tank was corroded threw and leaking from the salt and wet carpet
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate