Lofting software?
-
- Posts: 199
- Joined: Tue Jan 08, 2008 11:53 pm
- 16
- Location: Mexico
Lofting software?
Is there a lofting program that idiots can understand, something that will interface line drawings from generic cadd or autocadd that you have tried that is suitable for the technically challanged?
-
- Posts: 1
- Joined: Mon Jan 14, 2008 3:14 pm
- 16
- Location: S. California
Re: Lofting software?
You might try Delftship, a free download:Bullshipper wrote:Is there a lofting program that idiots can understand, something that will interface line drawings from generic cadd or autocadd that you have tried that is suitable for the technically challanged?
http://www.delftship.net/
This code does not use NURBS surfaces, so it's easier to use than most, but unless you already have (manual) lofting experience, you're in for a rough ride.
Do you already have 2D lines drawings, or will you be developing these as well?
One thing unique to aluminum boats is the intolerance for compound curvature. I'm not an expert, but I would think you would want to be sure that all the curves and resulting surfaces are developable (ruled) so you can bend them up if the hull material is metal.
You could easily create a 3D computer surface that cannot be bent using tradtional metal forming.
I'm not a loftsman, but I've lofted a couple of boats including one for Jack Cole, the Skipjack 30. We used some pretty high end tools for his deal, but all the same it was a nightmare. In the end, they used the computer loft data just for 2D section templates, as they did not want to write the check for the 5 axis plug machining.
If you would add some detail as to what you are starting with and what you wish to achieve, I'd be happy to offer some suggestions.
-
- Donator '09 '10
- Posts: 510
- Joined: Wed Jan 09, 2008 9:27 pm
- 16
- Location: Montauk, NY
Bullshipper, Hows things,
I use AutoCAD 2007 but John from Ironwood took the Auto-CAD into Rhino 3D and makes real nice 3-dimentional renderings for his clients. You can get a demo license for free I think, or at least you use too. Here is the link>>> http://www.rhino3d.com/
Marty
I use AutoCAD 2007 but John from Ironwood took the Auto-CAD into Rhino 3D and makes real nice 3-dimentional renderings for his clients. You can get a demo license for free I think, or at least you use too. Here is the link>>> http://www.rhino3d.com/
Marty
"IRONWOODTUNA" the Alloy Sportfisherman Battleship!