DEEP AND WIDE 14’ ALUMINUM UTILITY BOAT

General boating discussion
hershey2014
Posts: 11
Joined: Mon Mar 10, 2014 10:54 am

DEEP AND WIDE 14’ ALUMINUM UTILITY BOAT

#1

Post by hershey2014 » Fri Oct 05, 2018 12:57 pm

I want to buy a 14’ aluminum utility boat for fishing a very small body of water my cottage is located on. I want the widest and deepest 14’ utility boat available for stability and in case I use it in larger bodies of water. I also realize the deepest boat may not be the widest. Without having to go to 20 different dealers, can anyone tell me the brands and models I should be looking at? I appreciate your input. Thanks.

alumioforte
Posts: 45
Joined: Sun Nov 27, 2016 8:08 pm

Re: DEEP AND WIDE 14’ ALUMINUM UTILITY BOAT

#2

Post by alumioforte » Fri Oct 05, 2018 1:47 pm

Have you looked at www.silverbackmarine.com

User avatar
welder
Site Admin
Posts: 4549
Joined: Thu Jan 03, 2008 11:51 pm
Location: Whitesboro, Texas
Contact:

Re: DEEP AND WIDE 14’ ALUMINUM UTILITY BOAT

#3

Post by welder » Mon Oct 08, 2018 8:32 am

http://www.pacificboats.com/commercial- ... kboats.cfm

They will build you anything you want, just call Julie to get started.
Lester,
PacificV2325, Honda BF225
2386

MacCTD
Posts: 507
Joined: Tue Jul 22, 2008 2:53 pm
Location: MA

Re: DEEP AND WIDE 14’ ALUMINUM UTILITY BOAT

#4

Post by MacCTD » Sat Oct 13, 2018 2:37 pm

welder wrote:
Mon Oct 08, 2018 8:32 am
http://www.pacificboats.com/commercial- ... kboats.cfm

They will build you anything you want, just call Julie to get started.
I did not know that, have they built many boats smaller than 19'?
'05 Pacific 1925
Honda 90hp

JonH
Posts: 69
Joined: Fri Jun 10, 2016 12:20 pm
Location: Houston / Ketchikan

Re: DEEP AND WIDE 14’ ALUMINUM UTILITY BOAT

#5

Post by JonH » Sat Oct 13, 2018 4:42 pm

www.croziercraft.com
Also check out his Facebook page, you can see his builds as they progress.

Chad has built several in that size range, with self bailing cockpits.

User avatar
welder
Site Admin
Posts: 4549
Joined: Thu Jan 03, 2008 11:51 pm
Location: Whitesboro, Texas
Contact:

Re: DEEP AND WIDE 14’ ALUMINUM UTILITY BOAT

#6

Post by welder » Sat Oct 13, 2018 7:11 pm

they used to build a 17 V hull but they should be able to build a version of their flat bottom work boat for you.
Lester,
PacificV2325, Honda BF225
2386

Post Reply Previous topicNext topic