Pacific Boats Cutty Cabin?

General boating discussion
migolito
Posts: 3
Joined: Mon Nov 04, 2013 12:00 pm

Pacific Boats Cutty Cabin?

#1

Post by migolito » Mon Nov 04, 2013 12:13 pm

My net search has not been successful, so. I'm looking for an aluminum plate boat (Pacific Skiff type) to use for fishing in the Morro Bay and north area of Cali. I've froozen my rear off with a CC style boat, so, I'm looking for something with an open back cutty cabin w/maybe room for a bunk/and head. Just like the Sport Cabin on a Parker Boats2320. I figure on nicer days I can leave the back open, and on colder days I can snap in a canvas rear enclosure and turn on a heater. I like the 2352 because it has a deeper deadrise (18). Does anyone have any suggestions?

ruggit
Posts: 107
Joined: Sun Jan 27, 2008 4:13 pm
Location: Coeur d Alene, Idaho

Re: Pacific Boats Cutty Cabin?

#2

Post by ruggit » Mon Nov 04, 2013 2:21 pm

There was a Crozier 22 on the Seattle Craigs list. Lots of folks that can build you a nice boat in the NW. What you are looking for is pretty popular in the NW. I like Armstrong, but they ain't inexpensive these days.
Armstrong 29 with Yamaha F350

Chtucker
Posts: 442
Joined: Tue Jan 10, 2012 7:14 pm

Re: Pacific Boats Cutty Cabin?

#3

Post by Chtucker » Mon Nov 04, 2013 4:50 pm

Much better deal than the Crozier..

http://www.boattrader.com/listing/2013- ... und-367319

I have been on both, and the Armstrong is the best value. The Crozier is overpriced, but well built. Chad Crozier said he could build a brand new boat for the asking price.

User avatar
welder
Site Admin
Posts: 4549
Joined: Thu Jan 03, 2008 11:51 pm
Location: Whitesboro, Texas
Contact:

Re: Pacific Boats Cutty Cabin?

#4

Post by welder » Mon Nov 04, 2013 9:06 pm

Would something like this work?

Image
Lester,
PacificV2325, Honda BF225
2386

migolito
Posts: 3
Joined: Mon Nov 04, 2013 12:00 pm

Re: Pacific Boats Cutty Cabin?

#5

Post by migolito » Mon Nov 04, 2013 9:15 pm

Thats pretty close. I'm likin the forward tilted windows (cuts the glare and sheds water). However, I'm looking for a full width pilot house with walk around gunnels, and perhaps a v-birth. The rear of the pilot house can be open so I can just use a snap-in canvas to close it, or can have a door.

Thats a great looking boat BTW!

User avatar
welder
Site Admin
Posts: 4549
Joined: Thu Jan 03, 2008 11:51 pm
Location: Whitesboro, Texas
Contact:

Re: Pacific Boats Cutty Cabin?

#6

Post by welder » Mon Nov 04, 2013 10:00 pm

We getting closer with this one?
Image
Lester,
PacificV2325, Honda BF225
2386

User avatar
welder
Site Admin
Posts: 4549
Joined: Thu Jan 03, 2008 11:51 pm
Location: Whitesboro, Texas
Contact:

Re: Pacific Boats Cutty Cabin?

#7

Post by welder » Mon Nov 04, 2013 10:01 pm

and check this link out>>>>>>>> http://www.pacificboats.com/pacboats_027.php
Lester,
PacificV2325, Honda BF225
2386

Napa Mike
Posts: 355
Joined: Fri Oct 01, 2010 2:18 pm
Location: Bainbridge Island WA

Re: Pacific Boats Cutty Cabin?

#8

Post by Napa Mike » Mon Nov 04, 2013 10:38 pm

how about this one? Made by Wooldridge, an old family boat business. it is a 23 with a cool front opening for access to the anchor.
Mike
Attachments
wooldridge.jpg
wooldridge.jpg (143.51 KiB) Viewed 1674 times
wooldridge 23 bow.jpg
wooldridge 23 bow.jpg (150.64 KiB) Viewed 1674 times

migolito
Posts: 3
Joined: Mon Nov 04, 2013 12:00 pm

Re: Pacific Boats Cutty Cabin?

#9

Post by migolito » Tue Nov 05, 2013 4:52 pm

welder wrote:and check this link out>>>>>>>> http://www.pacificboats.com/pacboats_027.php
Very close actually. I like both. I hate to be a pita, now can they be combined. The first appears to be the full width of the boat which I like, the second (link) has the bunks. Can the full width cabin extend to the bow creating an actual v-birth area? I don't need to stand in bow area. The anchor/windless can sit on the cabin with rode storage in a hatch. Earlier I said 'walk around' gunnels. I should have said walk ON gunnels.Something along the lines of this; http://www.starlingmarine.com/wp-conten ... _64921.jpg

I guess I should expand a little on why I'm being so picky. I retired young (50) and I'll be moving to the Morro Bay area this summer. I'll be using the boat for the usual fishing, diving etc, but, I'll also be using my boat to take Wounded Warriors and their families fishing, etc. So, I need an area accessible to sleep, rest, change, etc. The Pacific appears to be a level cabin entry which will facilitate wheelchair access (mobility access) and an open back (or wide door) would do the same.

User avatar
welder
Site Admin
Posts: 4549
Joined: Thu Jan 03, 2008 11:51 pm
Location: Whitesboro, Texas
Contact:

Re: Pacific Boats Cutty Cabin?

#10

Post by welder » Tue Nov 05, 2013 5:25 pm

Give Pacific a call and talk to Julie 888-587-7111, she can help you with your needs.

And don't forget, we have some fine builders here and they will be more than happy to answer your questions.
Lester,
PacificV2325, Honda BF225
2386

User avatar
welder
Site Admin
Posts: 4549
Joined: Thu Jan 03, 2008 11:51 pm
Location: Whitesboro, Texas
Contact:

Re: Pacific Boats Cutty Cabin?

#11

Post by welder » Tue Nov 05, 2013 5:34 pm

I spent a week on one like this one up in Alaska and it did the job just fine.
http://www.wooldridgeboats.com/catalog/ ... pilothouse

Image
Lester,
PacificV2325, Honda BF225
2386

Napa Mike
Posts: 355
Joined: Fri Oct 01, 2010 2:18 pm
Location: Bainbridge Island WA

Re: Pacific Boats Cutty Cabin?

#12

Post by Napa Mike » Wed Nov 06, 2013 1:59 pm

migolito:

Let us know if you end up having Pacific build your boat. I would love to see picks of a 23 sport cabin pacific!

Cheers,
Mike

S L Dave
Donator #1 '08, '09, '10, '11, '12, '13
Posts: 1077
Joined: Thu Mar 06, 2008 10:43 pm
Location: LA/Western NY

Re: Pacific Boats Cutty Cabin?

#13

Post by S L Dave » Thu Nov 07, 2013 1:30 am

Image

Image

Image

Image
"Once in a while you get shown the light in the strangest of places if you look at it right."
Image

glen wooldridge
Sponsor
Posts: 774
Joined: Fri Oct 28, 2011 11:12 pm
Contact:

Re: Pacific Boats Cutty Cabin?

#14

Post by glen wooldridge » Thu Nov 07, 2013 5:41 pm

Here is a Pilothouse with a cuddy area that has front leaning windows and no rear wall. Glen

Image
Wooldridge Boats
1303 S 96th St.
Seattle, WA. 98108-5011
Hours: Monday through Friday
7:30AM to 4:00PM

Post Reply Previous topicNext topic