1986 SeaArk Rebuild

General boating discussion
86SeaArk
Posts: 2
Joined: Fri Feb 23, 2018 5:25 pm
6

1986 SeaArk Rebuild

#1

Post by 86SeaArk »

Hello I am new to the site. I have read a good bit on the site but just now registered. I purchased a 1986 SeaArk a little over a year ago and spent many many hours to rebuild it. I started by stripping it down to nothing. It is 1/4 inch aluminum and very solid built. I had it painted with the black non fouling paint and the white is made for aluminum. I will spare you the list of everything that I did, but know that everything except the motor is new hoses and wiring and all. The motor is a 1996 2 stroke that I have had completely gone through. New computer, timing advance, plugs, filters, and more. All of the cylinders have good compression and it runs very strong. I am attaching pictures and can provide any question answers. I have done a good bit of research on these, I would like to know if you guys think that I am correct. I bought this boat to flip it, and I am ready to sell. So if you know anyone looking for this type boat it is ready. I have found this type of boat from 70 to 90 thousand in this condition, so I am starting at 80. Please give your opinion.
Attachments
20171231_171547.jpg
20171231_171547.jpg (116.5 KiB) Viewed 3435 times
20171231_171628.jpg
20171231_171628.jpg (122.33 KiB) Viewed 3435 times
20171231_171659.jpg
20171231_171659.jpg (98.22 KiB) Viewed 3435 times
20171231_171717.jpg
20171231_171717.jpg (149.8 KiB) Viewed 3435 times
20171231_171727.jpg
20171231_171727.jpg (99.98 KiB) Viewed 3435 times
20171231_171748.jpg
20171231_171748.jpg (90.33 KiB) Viewed 3435 times
20171231_171756.jpg
20171231_171756.jpg (118.09 KiB) Viewed 3435 times