Hey Guys
Things are a little quiet at the moment so I have the chance to catch up on some computer stuff. thought you would like to see some pic's of the last boat to roll out the door.
It has all be water tested since these photos, and is being used and abused on a regularly basis.
Custom Series Aussie Alloy
Custom Series Aussie Alloy
- Attachments
-
- NT Unique 5.2m Custom series.jpg (40.22 KiB) Viewed 5457 times
-
- NT Unique 520 Custom series.jpg (27.42 KiB) Viewed 5457 times
-
- NT Unique custom series plate boat.jpg (31.42 KiB) Viewed 5457 times
[url]www.ntunique.com.au[url]
Custom Plate Boats
Boat Modifications and Repairs
Custom Plate Boats
Boat Modifications and Repairs
-
- Posts: 509
- Joined: Thu Oct 06, 2011 9:20 am
- 12
- Your location: Middle Georgia
Re: Custom Series Aussie Alloy
From the looks of her, you be the one delivering the pain! Ruggedly constructed and I'm really digging the stern set-up and tuna door.
If you are already fishing her, show us the finished beauty!
If you are already fishing her, show us the finished beauty!
I only do what the voices in the Tackle Box tell me to.
Re: Custom Series Aussie Alloy
Howd'y
I have to catch up with the owner and try and get some water shots, I went out for the water test but all the pic's that were taken were mostly from within the boat.
At the moment this is all I have
I have to catch up with the owner and try and get some water shots, I went out for the water test but all the pic's that were taken were mostly from within the boat.
At the moment this is all I have
- Attachments
-
- NT Unique 5.2m water test.jpg (16.99 KiB) Viewed 5401 times
[url]www.ntunique.com.au[url]
Custom Plate Boats
Boat Modifications and Repairs
Custom Plate Boats
Boat Modifications and Repairs
Re: Custom Series Aussie Alloy
My first time on here for a while boat looks great. Is it one of Adam's or a Plate Alloy Australia boat? Looks a lot like PAA's 5.3m.
Re: Custom Series Aussie Alloy
Hey Chris
Na actually it's neither, it's a CNC marine by Steve Chappel. I got a really really good rate offered by onesteel perth for materials and cutting, ended up cheaper to get it down there and shipped up than it was to get cut in melbourne or localy in Darwin even.
Your builder in townsville seems to be punching out some nice hulls.
Cheers
Na actually it's neither, it's a CNC marine by Steve Chappel. I got a really really good rate offered by onesteel perth for materials and cutting, ended up cheaper to get it down there and shipped up than it was to get cut in melbourne or localy in Darwin even.
Your builder in townsville seems to be punching out some nice hulls.
Cheers
[url]www.ntunique.com.au[url]
Custom Plate Boats
Boat Modifications and Repairs
Custom Plate Boats
Boat Modifications and Repairs