AluminumAlloyBoats.com

Anyone have one ? Just wondering if anyone has a pic of one on their transom. Or if someone has it and how they like it.

I first have to know what you're asking?

I have no idea what a "Tm260 on a Pacific" means....MaybeIbe outa the loop here in sunny Florida.
But I do have a very fished Pacific 26.

Jetty, that would be a kick-butt Airmar million watt tranducer for a fishfinder.



Dale (ratherbefishin) has one on his Hewescraft

its a transducer that i have been looking into. Its just huge. and i was wondering if anyone else has one. i have a 23ft pacific and the mounting bracket might be to small. i might need to weld another bracket above the other.

I have that transducer mounted on my pacific v2325.I have a furuno fcv 525 unit.For the most part I am pleased with this combo.I made my own mounting bracket out of aluminum.I think that I posted some pics on here a few years ago.I will say that I have fished out of friends boats with a thru hull transducer and the same furuno fcv 525, they get a much better reading at high speeds.With the thru hull we could actually mark fish running at speeds up to 28mph.I get some interference with the transom mount.At trolling speed the two transducers have comparable results.I may be able to get better results at higher speeds if I took the time to make a few minor adjustments of the transducer height and angle.My boat is not here right now or I would attach a pic of the mount that I made.If I was buying another new boat I would have a thru hull installed at the early stages of manufacturing.

I have a 22ft Hewescraft and mounted the TM260 on it last year. It works awesome. When all is quiet on the water, you can hear it pinging.

Here is mine.

Hooked up to a Furuno 585. I use the centre line 600W when cruising then swap leads & put the big boy into the water when I am checking out a mark. I can nearly count the spines on the fish. I use the 260 when I am deeper than 120'. The difference, even at that shallow depth, is unbelievable.

If that's one......mine is all about the same. (Raymarine C120 supplied) I can hear mine ping too in shallow water against the bottom of the boat.

Okay, I guess (like Navy Gargon) I needed the word transducer attached to the model #.

Sorry.