Custom 21' Wooldridge offshore center console
-
- Posts: 28
- Joined: Sun Jun 03, 2012 11:52 pm
- 11
- Your location: PNW
Re: Custom 21' Wooldridge offshore center console
Lol, I should have clarified that Whale is the manufacturer. Thanks for sparing us the mental drawing
We have a pretty long list of electronics and accessories that is always changing so I will try to note when things appear in the build pictures as much as possible.
Just got back from the factory and things are really starting to take shape!
We have a pretty long list of electronics and accessories that is always changing so I will try to note when things appear in the build pictures as much as possible.
Just got back from the factory and things are really starting to take shape!
- Attachments
-
- 2012.8.17 041 c.jpg (90.62 KiB) Viewed 13417 times
-
- 2012.8.17 038 c.jpg (98.03 KiB) Viewed 13417 times
-
- 2012.8.17 039 c.jpg (114.62 KiB) Viewed 13417 times
-
- 2012.8.17 040 c.jpg (110.85 KiB) Viewed 13417 times
-
- Posts: 28
- Joined: Sun Jun 03, 2012 11:52 pm
- 11
- Your location: PNW
Re: Custom 21' Wooldridge offshore center console
Roof and arch up. That's Mark the hardcore fisherman, I mean welder.
- Attachments
-
- 2012.8.23 010.JPG (93.99 KiB) Viewed 13362 times
-
- 2012.8.23 012.JPG (82.59 KiB) Viewed 13362 times
-
- Posts: 232
- Joined: Wed Apr 20, 2011 4:10 am
- 13
- Your location: Pacific Beach, WA.
Re: Custom 21' Wooldridge offshore center console
That's one SEXY ride you have there
"A lean dog is a mean dog and the mean dog always gets the bone!"
-
- Posts: 28
- Joined: Sun Jun 03, 2012 11:52 pm
- 11
- Your location: PNW
Re: Custom 21' Wooldridge offshore center console
Thanks wetwhopper!
Here's a few more showing some of the window cut outs (still waiting on a couple portlights), roof structure, transom door, and some minor tweaks to the dash- my bad Grant In the last picture you can kind of see the extended tray/footsteps to the bow deck. I can't stop staring at that roof...
Here's a few more showing some of the window cut outs (still waiting on a couple portlights), roof structure, transom door, and some minor tweaks to the dash- my bad Grant In the last picture you can kind of see the extended tray/footsteps to the bow deck. I can't stop staring at that roof...
- Attachments
-
- gullwing door!!!
- 2012.8.27 009.JPG (90.65 KiB) Viewed 13322 times
-
- dialing in the dash
- 2012.8.27 004.jpeg (78.51 KiB) Viewed 13322 times
-
- lots of room back there
- 2012.8.27 008.JPG (95.04 KiB) Viewed 13322 times
-
- transom door with removable hinge, will probably spend more time in the garage
- 2012.8.27 007.JPG (75.11 KiB) Viewed 13322 times
-
- Contributor/Donator '08
- Posts: 1205
- Joined: Sat Jan 12, 2008 4:38 pm
- 16
- Location: Orange County
Re: Custom 21' Wooldridge offshore center console
Very cool pictures and descriptions. Thank You for sharing
What are you going to name her?????? My suggestion "Woolly Mammoth"
My head is just spinning from Your Wooldridge and Peezer's Pacific Builds I think we are going to need a Maiden voyage fish off contest
What are you going to name her?????? My suggestion "Woolly Mammoth"
My head is just spinning from Your Wooldridge and Peezer's Pacific Builds I think we are going to need a Maiden voyage fish off contest
Mark
2325 WA PACIFICSKIFF
2325 WA PACIFICSKIFF
-
- Posts: 28
- Joined: Sun Jun 03, 2012 11:52 pm
- 11
- Your location: PNW
Re: Custom 21' Wooldridge offshore center console
No problem Mojo, my pleasure! We have been calling her Yolo for fun right now (inside joke) but not sure how serious we are about that. From the looks of it, Peezer would outfish us in the big blue but we might put a few more salmon in the box with our 3 scotty's and TR-1 Gold, so to make it fair I say first fish wins (flounders count)
Just got back from the factory wishing the bare aluminum on the console farewell as she will be going to paint next week (JUST the console...) and saying hello to a few new additions!
Just got back from the factory wishing the bare aluminum on the console farewell as she will be going to paint next week (JUST the console...) and saying hello to a few new additions!
- Attachments
-
- grab rails getting welded on
- image-1.jpeg (114.2 KiB) Viewed 13132 times
-
- Transom coming to life...
- image.jpeg (123.8 KiB) Viewed 13132 times
-
- Posts: 28
- Joined: Sun Jun 03, 2012 11:52 pm
- 11
- Your location: PNW
Re: Custom 21' Wooldridge offshore center console
paint just finished an hour ago- getting closer...
- Attachments
-
- 2012.9.12 006.JPG (108.37 KiB) Viewed 13101 times
-
- 2012.9.13 003 c.jpg (85.56 KiB) Viewed 13101 times
-
- Contributor/Donator '08
- Posts: 1205
- Joined: Sat Jan 12, 2008 4:38 pm
- 16
- Location: Orange County
Re: Custom 21' Wooldridge offshore center console
She is looking great Season up north looking like it's in the bottom of the eighth..... two outs.
Heh heh I was thinking of evening the playing field. Either Spiderman-Zebco rod biggest fish or some sort of points system............ winner gets a Aluminum Alloy Boats Shirt???????? What do you think Les???????
Heh heh I was thinking of evening the playing field. Either Spiderman-Zebco rod biggest fish or some sort of points system............ winner gets a Aluminum Alloy Boats Shirt???????? What do you think Les???????
Mark
2325 WA PACIFICSKIFF
2325 WA PACIFICSKIFF
- welder
- Site Admin
- Posts: 4668
- Joined: Thu Jan 03, 2008 11:51 pm
- 16
- Location: Whitesboro, Texas
- Contact:
Re: Custom 21' Wooldridge offshore center console
I'm in but I have to have more shirts printed up.
Sure wish we had a really cool logo.
Sure wish we had a really cool logo.
Lester,
PacificV2325, Honda BF225
2386
PacificV2325, Honda BF225
2386
Re: Custom 21' Wooldridge offshore center console
Okay, Grant, I have a question regarding the offshore brackets. They look funny to me. Let's say your OS bracket is 24" long. I think most are less than this, but let's round up. Why not just make the hull 2' longer and have a standard transom with a splashwell? I think it's a much cleaner look, gives even more buoyancy in the stern, and the splashwell is great for bleeding fish. What is the advantage of an OS bracket over just extending the hull the same amount? What is the cost difference, with respect to labor? materials? Is there a difference in rigidity? I don't understand why OS brackets are so prevalent. Thanks.GrantWooldridge wrote:jj225 wrote:Didn't realize there was no "super" in the "sport" 20' model. The way the senior Wooldridge explained it over the phone to me it made it sound like the bracket on the 20' model was slicker than chit and a much better design. Maybe he was just being a salesman at that point. Quite frankly I like the idea of an extended bracket. Many boat builders use them.
The 20' doesn't have a self bailing deck but it can be added on and with the 150hp only being about 120lbs lighter you
wouldn't think it would make that much difference. Just add a standard bait tank on the back and it'll weigh more than
that. Kind of raises more questions imo regarding the 20' which is what I'm interested in.
Superfishial wrote:Yes the bottom is extended to provide more flotation for the 625 pounds of power with the self bailing design and it will give a nice ride. Wooldridge has yet to make a 20' Super Sport Offshore Pilot and Glen please correct me if I'm wrong but the 20' Sport Offshore Pilots don't have self bailing decks and the 150's that go on them are light enough to not require extended hull type brackets. The higher top speed, fuel economy, and handling of a set back bracket makes more sense on a hull like the Sport Offshore.
jj225 - The bracket with the displacement box is standard though we can do the bottom hull extension also. There is no right or wrong version. The bracket with displacement box makes for a little bit faster boat and the motor can be mounted 3" higher. This version also helps in following seas as the water comes under the bracket and box and helps lift the rear of the boat. The bottom pod extension is a good ad if someone is going to have lots of weight in HP, batteries, fuel or people in a smaller boat as it will help ad buoyancy and lift when fishing. This was the perfect combo for this boat with its size, power and that it was going to have a self draining floor. There are pros and cons to both and anyone can feel free to call and pick my brain about it if they like. I would be happy to answer any questions.
I hope this helps.
Grant Wooldridge - (206) 722-8998
-
- Posts: 28
- Joined: Sun Jun 03, 2012 11:52 pm
- 11
- Your location: PNW
Re: Custom 21' Wooldridge offshore center console
Welder and Mojo- I want an Aluminum Alloy Boats t-shirt! But as mojo said, my season is dwindling. I might be able to scratch some late silvers if we're lucky but most likely looking at sea run cutthroat and chum (if I'm really lucky).
Paddler- You will get a quicker answer from Grant if you give him a call as he rarely checks this site. I will let him know about your inquiry in case he has time to step away from the boat and answer here.
Out of paint and into rigging. Soon now, very soon
Paddler- You will get a quicker answer from Grant if you give him a call as he rarely checks this site. I will let him know about your inquiry in case he has time to step away from the boat and answer here.
Out of paint and into rigging. Soon now, very soon
- Attachments
-
- 2012.9.18 006 c.jpeg (94.77 KiB) Viewed 13014 times
-
- Posts: 28
- Joined: Sun Jun 03, 2012 11:52 pm
- 11
- Your location: PNW
Re: Custom 21' Wooldridge offshore center console
Few more pics...
Cool story about that dash- Grant helped me customize that thing to-the-T by mocking up steering wheels, MFD, binnacle, to get both angles just right. The height of the bottom of the glass is only 48" (dash @ 46") because the console is so far forward we wanted to increase visibility of the bow. Once the dash was built, the angle of the upper face turned out to be slightly steep to be looking down at the MFD screen. It was my fault because I made the final call on the angle of that plate BUT instead of living with it, Grant turned my mistake into an even better idea which was to not only reduce the angle by sinking a space for the MFD but also raise it up so I could see it better from the stern while setting down riggers and motor mooching/jigging at the tiller. I stopped in about a week after that and Grant had also created a slight riser pad for the tilt helm so that we can get more adjustments at the wheel. The fact that Grant and company can put so much time and thought into each boat while they have 10 others going at the same time is pretty amazing.
Cool story about that dash- Grant helped me customize that thing to-the-T by mocking up steering wheels, MFD, binnacle, to get both angles just right. The height of the bottom of the glass is only 48" (dash @ 46") because the console is so far forward we wanted to increase visibility of the bow. Once the dash was built, the angle of the upper face turned out to be slightly steep to be looking down at the MFD screen. It was my fault because I made the final call on the angle of that plate BUT instead of living with it, Grant turned my mistake into an even better idea which was to not only reduce the angle by sinking a space for the MFD but also raise it up so I could see it better from the stern while setting down riggers and motor mooching/jigging at the tiller. I stopped in about a week after that and Grant had also created a slight riser pad for the tilt helm so that we can get more adjustments at the wheel. The fact that Grant and company can put so much time and thought into each boat while they have 10 others going at the same time is pretty amazing.
- Attachments
-
- tricked out!
- 2012.9.19 016 c.jpeg (74.07 KiB) Viewed 12977 times
-
- another angle showing the gullwing door opening
- 2012.9.18 007 c.jpeg (98.16 KiB) Viewed 12977 times
-
- rear flip seat brackets installed
- 2012.9.19 017 c.jpeg (68.48 KiB) Viewed 12977 times
-
- Posts: 28
- Joined: Sun Jun 03, 2012 11:52 pm
- 11
- Your location: PNW
Re: Custom 21' Wooldridge offshore center console
Thanks Peezer, like yours too
Scotty is a brand of downrigger used in the PNW for Salmon fishing and TR-1 Gold is an autopilot developed for low hp kicker motors and commonly used around here for trolling specific patterns or holding positions in wind, waves, and current while fishing salmon and bottom fish.
I hear you on the rod holders. After I saw your boat I liked the idea of 4 coming off the radar arch so I double checked our arch but it was built angling forward to follow the windshield line, which still looks cool but I'm not sure how rod holders coming off the sides in the opposite direction would work out... Still thinking about it...
So are we barbie poling it or what?
Scotty is a brand of downrigger used in the PNW for Salmon fishing and TR-1 Gold is an autopilot developed for low hp kicker motors and commonly used around here for trolling specific patterns or holding positions in wind, waves, and current while fishing salmon and bottom fish.
I hear you on the rod holders. After I saw your boat I liked the idea of 4 coming off the radar arch so I double checked our arch but it was built angling forward to follow the windshield line, which still looks cool but I'm not sure how rod holders coming off the sides in the opposite direction would work out... Still thinking about it...
So are we barbie poling it or what?
-
- Posts: 28
- Joined: Sun Jun 03, 2012 11:52 pm
- 11
- Your location: PNW
Re: Custom 21' Wooldridge offshore center console
LOLOL horrible choice of words on my part, guess I have a habit of sending mixed messages here I was referring to the kiddy pole challenge welder or mojo suggested earlier.
I saw those davits and they sound legit but the fish I'm after are much smaller and don't require that much help, plus this haole likes to earn his catch
I hear ya on the electronics lock and I like your gasoline lock too- smart!
I'm good on rod holders for now as there will be 4 more along the gunwale railings and rear transom mounted to a sliding rail system allowing them to be repositioned at the turn of a dial. Also, Wooldridge is so close that I can tow her down and add/subtract whenever, REEL nice!
The transom sink box doubles as a live well and with the forespar high speed pickup, it should keep about a scoop of anchovies alive all the way out to blue water.
BTW A win is a win these days... I guess
I saw those davits and they sound legit but the fish I'm after are much smaller and don't require that much help, plus this haole likes to earn his catch
I hear ya on the electronics lock and I like your gasoline lock too- smart!
I'm good on rod holders for now as there will be 4 more along the gunwale railings and rear transom mounted to a sliding rail system allowing them to be repositioned at the turn of a dial. Also, Wooldridge is so close that I can tow her down and add/subtract whenever, REEL nice!
The transom sink box doubles as a live well and with the forespar high speed pickup, it should keep about a scoop of anchovies alive all the way out to blue water.
BTW A win is a win these days... I guess
-
- Posts: 28
- Joined: Sun Jun 03, 2012 11:52 pm
- 11
- Your location: PNW
Re: Custom 21' Wooldridge offshore center console
I hear ya on the round tank Peezer. I think this will work out and it sounds like Wooldridge has many happy customers using this shape. there's always enough room back there for a an additional tank if I find the need for one. Congrats on the boat, man she looks gorgeous! I drive by that launch on my way to work and it's a good thing I didn't see her in the water or else I might have crashed trying to count the rod holders LOL
I'm still a month out...
Just got back from the factory and here's a few updates...
I'm still a month out...
Just got back from the factory and here's a few updates...
- Attachments
-
- dual wiper system
- 2012.9.26 024 c.jpg (115.01 KiB) Viewed 12883 times
-
- rear flip up seat resting flush
- seatDOWN.JPG (87.83 KiB) Viewed 12883 times
-
- flipped up
- seatUP.JPG (103.1 KiB) Viewed 12883 times
-
- Miller Marine sliding rail mount system showing the billet rod holder adapter- SUPER burly! 2 additional tracks are mounted on opposite railing and along the transom. Beautiful system Mike!
- rail.JPG (117.84 KiB) Viewed 12883 times
-
- the name says it all
- logo.JPG (114.3 KiB) Viewed 12883 times
-
- Posts: 28
- Joined: Sun Jun 03, 2012 11:52 pm
- 11
- Your location: PNW
Re: Custom 21' Wooldridge offshore center console
Thanks Peezer, getting stoked! Out here it's mostly Scotty or Cannon and it's really a ford vs chevy kinda thing. Boca Grande tarpon downrigging sounds crazy! Give'r man! I wonder if the downrigger line would count as 1 of your 3 allowed per boat in the pass? Doesn't sound like folks follow the rules anyway down there I've never been but my fly fish buds are all about it and say it can be quite the gong show.
I'm not sure if I could step to an all out biggest fish contest with a Floridian as we just don't have the same caliber of targetable species up here. Halibut doesn't open until next year and I won't be trolling for those. How about an MPH contest
rod holder envy is already kicking in...
I'm not sure if I could step to an all out biggest fish contest with a Floridian as we just don't have the same caliber of targetable species up here. Halibut doesn't open until next year and I won't be trolling for those. How about an MPH contest
rod holder envy is already kicking in...
-
- Posts: 355
- Joined: Fri Oct 01, 2010 2:18 pm
- 13
- Your location: Bainbridge Island WA
- Location: Bainbridge Island WA
Re: Custom 21' Wooldridge offshore center console
Did you say earlier that you had a sleeping pod on your boat? If so, where will it be located?
Thanks,
Mike
Thanks,
Mike
-
- Posts: 28
- Joined: Sun Jun 03, 2012 11:52 pm
- 11
- Your location: PNW
Re: Custom 21' Wooldridge offshore center console
Peezer,
Etec 200 HO for the stir stick (220-ish horsepower). Attn: Welder & Mojo: My shirt size is Large
Mike,
The boat sleeps one person inside the cuddy/potti area just forward of the console. The need to sleep one is kinda rare but there was so much continuous space separated by only a single plate of aluminum that I had to seize the opportunity. Grant was onboard with the idea so he fabricated a removable door that connects the bow storage with the potti/console area. To create a level sleeping surface, they built a false deck out of marine plywood (same level as the deck) and it completely covers the potti and both batteries, which are located upfront in the bow storage area. The resulting area is similar to a backpackers tent with a ton of head room that tapers to some generous leg room. Coupled with dome lights and screened/vented port lights, it makes for an excellent crash space. I will post some pictures when Don (Grant's Uncle) is done rigging all the electronics because it's pretty busy in there right now.
Etec 200 HO for the stir stick (220-ish horsepower). Attn: Welder & Mojo: My shirt size is Large
Mike,
The boat sleeps one person inside the cuddy/potti area just forward of the console. The need to sleep one is kinda rare but there was so much continuous space separated by only a single plate of aluminum that I had to seize the opportunity. Grant was onboard with the idea so he fabricated a removable door that connects the bow storage with the potti/console area. To create a level sleeping surface, they built a false deck out of marine plywood (same level as the deck) and it completely covers the potti and both batteries, which are located upfront in the bow storage area. The resulting area is similar to a backpackers tent with a ton of head room that tapers to some generous leg room. Coupled with dome lights and screened/vented port lights, it makes for an excellent crash space. I will post some pictures when Don (Grant's Uncle) is done rigging all the electronics because it's pretty busy in there right now.
-
- Posts: 355
- Joined: Fri Oct 01, 2010 2:18 pm
- 13
- Your location: Bainbridge Island WA
- Location: Bainbridge Island WA
Re: Custom 21' Wooldridge offshore center console
cool Boat. Congrats!
- welder
- Site Admin
- Posts: 4668
- Joined: Thu Jan 03, 2008 11:51 pm
- 16
- Location: Whitesboro, Texas
- Contact:
Re: Custom 21' Wooldridge offshore center console
Guess I need to order more shirts.
Lester,
PacificV2325, Honda BF225
2386
PacificV2325, Honda BF225
2386
-
- Posts: 28
- Joined: Sun Jun 03, 2012 11:52 pm
- 11
- Your location: PNW
Re: Custom 21' Wooldridge offshore center console
I stopped by Wooldridge today just before they were closing up shop for the weekend and noticed Don has finished rigging the whole console and has moved back to the motors, downriggers, and pot puller. It was really something to see the NMEA 2k system come together "physically" and I can't wait to try it out! Should be ready to hit the water next week for a trial run but she will need to go back in for bottom paint and canvas work before we take her home.
Grant caught me snoozing in the cuddy : )
Grant caught me snoozing in the cuddy : )
- Attachments
-
- image-6.jpeg (86.01 KiB) Viewed 13230 times
-
- image-5.jpeg (111.05 KiB) Viewed 13230 times
-
- both outer rod holders custom cut to accept fly rods
- image-4.jpeg (128 KiB) Viewed 13230 times
-
- stir stick
- photo-1.JPG (116.05 KiB) Viewed 13230 times
-
- horrible picture shows: console dome lights, RCA switch (ipod-XM), Garmin VHF200 flush mounted, Jensen speakers
- ceiling.JPG (95.35 KiB) Viewed 13230 times
-
- head gear: GPS 17x, GMR18HD radar, GXM satellite/weather, VHF antenna, horn, Vision-X LED
- radar-top.JPG (113.78 KiB) Viewed 13230 times
-
- Posts: 28
- Joined: Sun Jun 03, 2012 11:52 pm
- 11
- Your location: PNW
Re: Custom 21' Wooldridge offshore center console
Today Grant sent me a few pictures of some of the cool features recently installed on the boat. Thought I might share but please be forewarned, there are some non-alloy materials included...
- Attachments
-
- custom door from boatoutfitters.com offers access to seatbox open storage. A 7 tray plano tackle storage from same manufacturer is installed on the opposite side. Will provide pics later. You can also see one of the diamond plate console storage doors- all locking.
- 2012.10.11 004.JPG (79.99 KiB) Viewed 13204 times
-
- Diamond Sea Glaze Gullwing door custom made for Wooldridge boats, exterior handles for outside entry
- 2012.10.11 002 c.jpg (98.88 KiB) Viewed 13204 times
-
- It's alive!!!
- 2012.10.11 005 c.jpg (76.17 KiB) Viewed 13204 times
-
- Donator '08 '09 '10
- Posts: 2433
- Joined: Wed Jan 09, 2008 8:55 am
- 16
- Your location: Mass
- Location: MA & RI
Re: Custom 21' Wooldridge offshore center console
You will love that little sleeping area My Maritime had it, and it was very useful space......and the 23' Maritime has enough room for two adults to sleep....cozy
Really wish my Pacific had it
Will the forward hatch be water tight enough so you keep that area nice and dry??
Great looking boat
Really wish my Pacific had it
Will the forward hatch be water tight enough so you keep that area nice and dry??
Great looking boat
-
- Posts: 28
- Joined: Sun Jun 03, 2012 11:52 pm
- 11
- Your location: PNW
Re: Custom 21' Wooldridge offshore center console
It floats
Handles beautifully and sits ever so level.
AlloyToy- The forward hatch will be water tight enough to keep the cuddy area dry and we will be diligent about keeping wet ropes outta there! Just in case, there are drainage areas to direct water down into the hull and into the bilge.
If anybody wants to check out the boat in person it will be at the Portland show and either the Puyallup or Seattle show as well, so stop by the Wooldridge booth and climb aboard!
Handles beautifully and sits ever so level.
AlloyToy- The forward hatch will be water tight enough to keep the cuddy area dry and we will be diligent about keeping wet ropes outta there! Just in case, there are drainage areas to direct water down into the hull and into the bilge.
If anybody wants to check out the boat in person it will be at the Portland show and either the Puyallup or Seattle show as well, so stop by the Wooldridge booth and climb aboard!
- Attachments
-
- 1-IMG_8366-001.jpeg (39.44 KiB) Viewed 13005 times
-
- 1-IMG_8374.jpeg (48.88 KiB) Viewed 13005 times
-
- 1-IMG_8376.jpeg (46.69 KiB) Viewed 13005 times
-
- 1-IMG_8377.jpeg (47.03 KiB) Viewed 13005 times
-
- 1-IMG_8383.jpeg (38.79 KiB) Viewed 13005 times
-
- Contributor/Donator '08
- Posts: 1205
- Joined: Sat Jan 12, 2008 4:38 pm
- 16
- Location: Orange County
Re: Custom 21' Wooldridge offshore center console
Very nice, what a great build Thank You so much for posting her up on AAB. I look forward to to reading about awesome adventures of monster fish/crab/shrimp and majestic scenery.
Mark
2325 WA PACIFICSKIFF
2325 WA PACIFICSKIFF