Page 1 of 1
need avice on priming/paint exposed bare aluimin under water level
Posted: Sat May 13, 2017 7:06 am
by Steve the Brain
need avice on priming/paint
Re: need avice on priming/paint exposed bare aluimin under water level
Posted: Sun May 14, 2017 6:37 pm
by Steve the Brain
engine hung
still waiting for paint advice
Re: need avice on priming/paint exposed bare aluimin under water level
Posted: Sun May 14, 2017 7:15 pm
by kmorin
Steve,
There is a thread on painting prep still active, might want to give that a read? it discusses some of the aspects of this work. Many of your other questions' answers could also be found in archived posts- some of them many times- so the site's Search function would probably provide at least fundamental or basic answers?
As a rule of thumb, bare aluminum can be left in salt water without corrosion risk (unless there is stray current on the hull) but it will sure grow 'critters'- sea life likes to bond to bare aluminum without bottom paint. It doesn't seem to corrode the metal but sea grasses and various other other growths sure does slow a boat's speed- so bottom paint is common in salt water.
Cheers,
Kevin Morin
Kenai, AK
Re: need avice on priming/paint exposed bare aluimin under water level
Posted: Sun May 14, 2017 7:28 pm
by Steve the Brain
hello kevin boat still has bottom paint
all I want to cover is exposed aluimin on transome
Re: need avice on priming/paint exposed bare aluimin under water level
Posted: Mon May 15, 2017 6:11 am
by Steve the Brain
I would like to prime POD /transom skin only exposed alumin
https://www.wholesalemarine.com/interlu ... 79098.html
the boats freeboard/top/bow complete boats color choosen is light grey metallic, proballey just scuff orginale enamel and use enamel.
bottom paint is fine will leave alone.
I tried rustoleum /self ech primer green stuff and marine topsider on upper bow it didn't turnout.
thanks STB