The Journey Begins
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Re: The Journey Begins
Thanks Mike your the first to comment on it. Most be getting old news for the rest. 34 Viewers and no replies. Everyone is still decompressing from the fishing to post. Here and on the Red Site not much activity to read or respond to. Without the fun of flaming trollers and know it alls the red site had died. Jackwagons and all that it means was fun till he took it personal; SOB!
Some more to add of the work that took place this past Saturday. I stopped by Coldwater Boats Today and they got a 36' on the jig and looks like they might finally get the 29' X 9' sport boat built as well. Russ aka CWB where you at for the Porn?
Some more to add of the work that took place this past Saturday. I stopped by Coldwater Boats Today and they got a 36' on the jig and looks like they might finally get the 29' X 9' sport boat built as well. Russ aka CWB where you at for the Porn?
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
-
- Posts: 355
- Joined: Fri Oct 01, 2010 2:18 pm
- 13
- Your location: Bainbridge Island WA
- Location: Bainbridge Island WA
Re: The Journey Begins
that is what is great about an alloy boat, and having the skill to work on it. You can always keep improving it! I know what you mean about the lag in recent posting activity. I finally got around to posting some stuff over on the red site too, mostly about the great coho fishing from mid august to mid October this year (as Bainbridge Mike), and it has definitely slowed down a lot!
Cheers,
Mike
Cheers,
Mike
- spoiled one
- Donator '08 '09 '10
- Posts: 1138
- Joined: Mon Jan 14, 2008 4:48 pm
- 16
- Your location: Anchorage, Alaska
- Location: Anchorage, Alaska
Re: The Journey Begins
I like the roof extension. You probably mentioned this towards the beginning of the thread, but can you sleep in the cuddy? When will she see the water again?
Spending my kids inheritance with them, one adventure at a time.
2010 AK Meet & Greet
2012 AK Meet and Greet
2010 AK Meet & Greet
2012 AK Meet and Greet
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Re: The Journey Begins
I sleep in the cuddy. It is no where near the size of yours. But two can sleep in there.
Halibut starts in May and deep water Lings open on early April. I have asked for 3 months moorage in LaPush but the Tribe as a new Harbor Master and there is list that I am on. End of March is a big Blackmouth Derby that I want in on. So May is the no Doo-doo gotta be done by. April is when I need it by and March is the date of a good party in Anachortis over the weekend of the derby.
Halibut starts in May and deep water Lings open on early April. I have asked for 3 months moorage in LaPush but the Tribe as a new Harbor Master and there is list that I am on. End of March is a big Blackmouth Derby that I want in on. So May is the no Doo-doo gotta be done by. April is when I need it by and March is the date of a good party in Anachortis over the weekend of the derby.
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
-
- Posts: 509
- Joined: Thu Oct 06, 2011 9:20 am
- 12
- Your location: Middle Georgia
Re: The Journey Begins
I also like that overhang extension. And how many rod holders was that? 52?
Have you gotten to run since you raised the engines? Been following some threads on fishing boards where the owners have gotten good results as well as better tab effectiveness. You've got a Destroyer size fish killing machine there, can't wait to see her battle ready, decked out with tackle filled holders and stuff. Bet the MissHayden's Captain is taking note of this escalation in the rod holder arms race.
Oh, as to the decline in recent posting, it isn't unique to here by any stretch. The fan board I follow for UGA is only getting 2-5 new posts a Day during the Week, more as Game Day approaches. The Catfish site has a vast membership and dozens of boards but the ones I play on have been quiet with the exception of the restricted board, which has been en fuego since this ACA mess has unfolded. THT hasn't been turning over as quickly either now that I think about it since I do look at the sales and gear boards. Football season, the Holidays approaching, families re-connecting, lots of stuff happening to keep folks' busy. And the Fairs....a different one every Weekend. Grandson is going to be so spoiled that we could use him as a WMD.
Have you gotten to run since you raised the engines? Been following some threads on fishing boards where the owners have gotten good results as well as better tab effectiveness. You've got a Destroyer size fish killing machine there, can't wait to see her battle ready, decked out with tackle filled holders and stuff. Bet the MissHayden's Captain is taking note of this escalation in the rod holder arms race.
Oh, as to the decline in recent posting, it isn't unique to here by any stretch. The fan board I follow for UGA is only getting 2-5 new posts a Day during the Week, more as Game Day approaches. The Catfish site has a vast membership and dozens of boards but the ones I play on have been quiet with the exception of the restricted board, which has been en fuego since this ACA mess has unfolded. THT hasn't been turning over as quickly either now that I think about it since I do look at the sales and gear boards. Football season, the Holidays approaching, families re-connecting, lots of stuff happening to keep folks' busy. And the Fairs....a different one every Weekend. Grandson is going to be so spoiled that we could use him as a WMD.
I only do what the voices in the Tackle Box tell me to.
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Re: The Journey Begins
We need tapatalk back. I just tried to post twice from my phone using Chrome. Lost all the data.
I spent an hour in the shop after work last night finishing up the faberacation of the two foldable seats. Done less the welding and hinges.
Now it will not allow pictures SOB!
I spent an hour in the shop after work last night finishing up the faberacation of the two foldable seats. Done less the welding and hinges.
Now it will not allow pictures SOB!
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
Re: The Journey Begins
Your pole for the anchor running light...are you making a motorized lift for it! Wow that boat is awesome. BTW, Had toe surgery, getting old is a daily process..all is fine. Great to see the mods and your own ideas come to life! Take care!
2009 Raider 185 Pro Fisherman, 2005 90Yamaha, 2012 Yamaha9.9HT, 2008 EzLoader roller, 2004 Dodge TCD dually, 2005/2015 Lance1161
-
- Donator '09
- Posts: 2246
- Joined: Sun Jan 13, 2008 12:19 am
- 16
- Your location: Seattle, WA
- Location: Seattle, WA
Re: The Journey Begins
No thanks, that screwy app knocked me off the site for a month and I wasn't even using it!goatram wrote:We need tapatalk back.
1987 24' LaConner pilothouse workboat, 225 Suzuki
please view and like: https://www.facebook.com/bottompainting/
please view and like: https://www.facebook.com/bottompainting/
- Sculpin
- Posts: 905
- Joined: Tue Apr 22, 2008 10:10 pm
- 16
- Location: Vancouver Island(The Rock), British Columbia
Re: The Journey Begins
Oh come on Chaps, it's so easy even a Canuck can use it I love tapa talk now too.Chaps wrote:No thanks, that screwy app knocked me off the site for a month and I wasn't even using it!goatram wrote:We need tapatalk back.
The boat looks awesome John. I'm heading down South again this year to the show and hope to meet up with you and stop by and see her .
John
Sculpin
23' Edwing
"Trying to go for tuna on the cheap you are asking for trouble. The ocean is a mean LITTLE GIRL that wants to kill you". - Shawn Hillier
Sculpin
23' Edwing
"Trying to go for tuna on the cheap you are asking for trouble. The ocean is a mean LITTLE GIRL that wants to kill you". - Shawn Hillier
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Re: The Journey Begins
I need to update the thread. This Weekend starts Verrrrry Sooooon and Work can not call me in do to the Head Cheese said I have worked four Weekends in a row. The limit! I have to take one off before they can make me work another 4. SOG! Work has been picking up but We, the Local 751 Voted down the $10,000 Boneus that we would have gotten if we had accepted the 8 year contract extension that International IAM and the Company concocted. Time will tell if we did the right thing.
The extension is now fully welded in. The rod holders will be spaced at 6.75" apart. We cut all of the holders from the old piece and then cleaned up. I cut the 1" pipe as shown on page 103. Now we started to fit the first 5 to the rail.
Bob I can not load and update the sight from my phone with out Tapatalk. There is even a new upgraded app if Les will look into it Please
Some may not aprove of the BD Salute so I paint Brushed the Boys little fingers out
I hope you still are enjoying this thread. John I have your room ready for you if you need it. Ken has a new way that he is making his spreader Bars for tuna.
I will also be home during the boat show recovering from my Left Hip Revision
The extension is now fully welded in. The rod holders will be spaced at 6.75" apart. We cut all of the holders from the old piece and then cleaned up. I cut the 1" pipe as shown on page 103. Now we started to fit the first 5 to the rail.
Bob I can not load and update the sight from my phone with out Tapatalk. There is even a new upgraded app if Les will look into it Please
Some may not aprove of the BD Salute so I paint Brushed the Boys little fingers out
I hope you still are enjoying this thread. John I have your room ready for you if you need it. Ken has a new way that he is making his spreader Bars for tuna.
I will also be home during the boat show recovering from my Left Hip Revision
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
- Sculpin
- Posts: 905
- Joined: Tue Apr 22, 2008 10:10 pm
- 16
- Location: Vancouver Island(The Rock), British Columbia
Re: The Journey Begins
Hey Zues she looks great buddy. I can see it now. I just can't afford all those rods !!!
Thank you SIR for the offer on the room and I would be more than happy to accommodate you with whatever you need to help you through that hip "revision". I look forward to seeing Ken's new spreader bars. I'll call you right shortly.
Your gal is a beauty buddy. Great work .
Cheers,
John
Thank you SIR for the offer on the room and I would be more than happy to accommodate you with whatever you need to help you through that hip "revision". I look forward to seeing Ken's new spreader bars. I'll call you right shortly.
Your gal is a beauty buddy. Great work .
Cheers,
John
John
Sculpin
23' Edwing
"Trying to go for tuna on the cheap you are asking for trouble. The ocean is a mean LITTLE GIRL that wants to kill you". - Shawn Hillier
Sculpin
23' Edwing
"Trying to go for tuna on the cheap you are asking for trouble. The ocean is a mean LITTLE GIRL that wants to kill you". - Shawn Hillier
-
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24
- Posts: 1756
- Joined: Mon Aug 18, 2008 1:37 am
- 15
- Your location: Kenai, AK
- Location: Kenai, Alaska
The Journey Begins; Hand Rail Alignment
goatram, looking at the post 327 I noticed the progression of the overhang and railing changes and I think I like the looks of the (vertical) side rail better before is was modified.
In the first photo (#327) the after cabin side side (vertical) rail has a single bend, and at 110-115 degrees, ends under the overhang and it looks clean, IMO.
Below, the upper rail is added and it looks like at one time it aligned with the lower vertical rail? (down a few photos) but then the vertical rail was trimmed and a new piece added which has another bend and a return so the top of the vertical rail now ends aft the new top rail.
I like the vertical rails' top end look better when they were directly under the new added top rail.
The new horizontal section (lower vertical rail's new top 3 bend piece) may give a better hand hold climbing out of the cockpit to the gunwale (?) but I preferred the look of those two rails to lining up, the upper one looking like it was a continuation of the lower one.
just mentioning the looks side of that mod; nice mod to the bait tank cover-that looks good.
cheers,
Kevin Morin
In the first photo (#327) the after cabin side side (vertical) rail has a single bend, and at 110-115 degrees, ends under the overhang and it looks clean, IMO.
Below, the upper rail is added and it looks like at one time it aligned with the lower vertical rail? (down a few photos) but then the vertical rail was trimmed and a new piece added which has another bend and a return so the top of the vertical rail now ends aft the new top rail.
I like the vertical rails' top end look better when they were directly under the new added top rail.
The new horizontal section (lower vertical rail's new top 3 bend piece) may give a better hand hold climbing out of the cockpit to the gunwale (?) but I preferred the look of those two rails to lining up, the upper one looking like it was a continuation of the lower one.
just mentioning the looks side of that mod; nice mod to the bait tank cover-that looks good.
cheers,
Kevin Morin
kmorin
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Re: The Journey Begins
Kevin I see what you mean. Must be something to do with design/welders. "Jim" the guy in the Pics Said the same thing. Now you pointing it out to me I see it as well. The hand hold is for when you are standing in the back and both hands are holding the rails and you look around the Cabin. I will discuss this with Jim again. I am taking him on a field trip to see the Work Boat Show this Friday in Seattle.
I have not taken many pictures yet of the work accomplished this weekend. Mostly prep work and on the interior. I still need 4 more pieces of 1 & 3/16" X 3/8" Teak Batten Strips to finish off the interior Modes. I also took out the Galley Station to get at the windows for trim and Insulation. 15 rod holders are now welded on the backside of the pipe above the roof. 13 more are welded and ready for installation on the front side of the pipe. the one I did take is of the new Mill that I am using to make a window for my Bait Tank. The tank will have two windows. The windows are 1/2" Plexiglass. The cut out will be 10" X 20" or so. The window will be set into the tank outside flush.
I have not taken many pictures yet of the work accomplished this weekend. Mostly prep work and on the interior. I still need 4 more pieces of 1 & 3/16" X 3/8" Teak Batten Strips to finish off the interior Modes. I also took out the Galley Station to get at the windows for trim and Insulation. 15 rod holders are now welded on the backside of the pipe above the roof. 13 more are welded and ready for installation on the front side of the pipe. the one I did take is of the new Mill that I am using to make a window for my Bait Tank. The tank will have two windows. The windows are 1/2" Plexiglass. The cut out will be 10" X 20" or so. The window will be set into the tank outside flush.
- Attachments
-
- The window being made on the Mill. The corners will be radiused. This is the first side being cut. I need to mill it .125" to match the tank thickness. My own Aquarium on the Boat. Cool I Think. Labor intensive to say the least I have already 3 hours on making the first one. the Mill is manually actuated. i.e. turning the nobs.
- 29'build303.jpg (57.11 KiB) Viewed 16389 times
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
-
- Posts: 355
- Joined: Fri Oct 01, 2010 2:18 pm
- 13
- Your location: Bainbridge Island WA
- Location: Bainbridge Island WA
Re: The Journey Begins
I would not change the overhang/hand rails/rod holders. I think they look bad BACK SIDE!
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Re: The Journey Begins
New security is a paint in the But I had to log back in
Move the first T to the Second T and read what it.
Move the first T to the Second T and read what it.
Last edited by goatram on Mon Dec 02, 2013 9:05 pm, edited 1 time in total.
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Re: The Journey Begins
Thanks upon further thinking I like them two. It is funny that two Pro Welder Fabricators said cut em off.
To continue the work on the cuddy I had to start cutting the chunk of teak left over from the Galley. This piece was ripped to about .070" thick by 2" to wrap around the Ceiling Vent
The next couple of pictures are the Bait tank Windows that I am installing. The 11" X 15" x 1/2" pieces of Plexi Glass was sourced from Tap Plastics and Cut on the New Mill I got from Vance DB. They will be drilled and tapped for 10-32 screws. The screws will hold the windows in place while the Sika Flex sealant (Like 5200) sets up. Two windows are being installed front and back on the tank.
To continue the work on the cuddy I had to start cutting the chunk of teak left over from the Galley. This piece was ripped to about .070" thick by 2" to wrap around the Ceiling Vent
The next couple of pictures are the Bait tank Windows that I am installing. The 11" X 15" x 1/2" pieces of Plexi Glass was sourced from Tap Plastics and Cut on the New Mill I got from Vance DB. They will be drilled and tapped for 10-32 screws. The screws will hold the windows in place while the Sika Flex sealant (Like 5200) sets up. Two windows are being installed front and back on the tank.
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Re: The Journey Begins
Clown Oil makes for steady hands! Another good use besides drinking it
Seats are welded in. I still need to get the right bolts and have a set of cushions made for them. 1" foam pad and black vinyl.
Seats are welded in. I still need to get the right bolts and have a set of cushions made for them. 1" foam pad and black vinyl.
- Attachments
-
- Starboard side The Vertical leg of both sit into a pocket welded into the floor
- 29'build316.jpg (42.4 KiB) Viewed 16334 times
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Re: The Journey Begins
The rod holders are welded up still need to clean them up a bit. 28 ea. 15 on the back side and 13 on the fwd face. With them, the 6 on the bait tank, the 6 on the gunnel, and the 12 on the front radar mount equals 52 each. OVER KILL? Yes!
The RBW has small blue LED lights that are 1/4" dia. that are installed flush in the roof structure. A little 5200 sealant will hold them in place for awhile. Wiring is all hidden in the tube. What a pain in the BACK SIDE.
The RBW has small blue LED lights that are 1/4" dia. that are installed flush in the roof structure. A little 5200 sealant will hold them in place for awhile. Wiring is all hidden in the tube. What a pain in the BACK SIDE.
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
- spoiled one
- Donator '08 '09 '10
- Posts: 1138
- Joined: Mon Jan 14, 2008 4:48 pm
- 16
- Your location: Anchorage, Alaska
- Location: Anchorage, Alaska
Re: The Journey Begins
Looks great, John. I really like the fold up seats. I think you have room for a few more rod holders.
Spending my kids inheritance with them, one adventure at a time.
2010 AK Meet & Greet
2012 AK Meet and Greet
2010 AK Meet & Greet
2012 AK Meet and Greet
- welder
- Site Admin
- Posts: 4672
- Joined: Thu Jan 03, 2008 11:51 pm
- 16
- Location: Whitesboro, Texas
- Contact:
Re: The Journey Begins
I would go for an even 60, might be a world record. I like it.
Lester,
PacificV2325, Honda BF225
2386
PacificV2325, Honda BF225
2386
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Re: The Journey Begins
You guys need to go back a page and see how the Seats went together. Only six views. Your slacking
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Re: The Journey Begins
Saw this Grip Tape at the Seattle Boat Show. I Got one 12" X 48 Section from them as the show was closing. The tape is a vinyl strip with particles cast into it. It seems to work.
http://www.gripallusa.com/#/home/
It was in the Light gray color. I cut it into two inch strips on my old 10" Carbide Tip Blade. Right after which I changed the blade. Sparks where flying that was for sure. I wiped down the fish box and applied half of three of the strips to the Bottom. The Box sloops down toward the center and when your stuffing tuna in the ice feet tend to slip in there to the center. The product claims to stay in place in the cold wet environments; We shall see. Today I ordered up another two strips to finish the box and toying with the Idea of applying it to the top of the deck instead of painting. The second product they have has metal studs that are inset in the vinyl. Those studs really locked your feet to their display at the show.
I have two posts on the previous page showing the hinges for the seats and the bait tank windows that have only 9 views.
I also see we have some more smiles
http://www.gripallusa.com/#/home/
It was in the Light gray color. I cut it into two inch strips on my old 10" Carbide Tip Blade. Right after which I changed the blade. Sparks where flying that was for sure. I wiped down the fish box and applied half of three of the strips to the Bottom. The Box sloops down toward the center and when your stuffing tuna in the ice feet tend to slip in there to the center. The product claims to stay in place in the cold wet environments; We shall see. Today I ordered up another two strips to finish the box and toying with the Idea of applying it to the top of the deck instead of painting. The second product they have has metal studs that are inset in the vinyl. Those studs really locked your feet to their display at the show.
I have two posts on the previous page showing the hinges for the seats and the bait tank windows that have only 9 views.
I also see we have some more smiles
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Re: The Journey Begins
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
- JETTYWOLF
- Contributor/donator/Location Nazi
- Posts: 6074
- Joined: Sun Jan 06, 2008 9:11 pm
- 16
- Your location: JACKSONVILLE FL USA
- Location: Tree-hugger, USA...they call it FLA.
Re: The Journey Begins
I hear by adorn this thread with the "Master of longest thread award....and Master O' the R&D"
Now tell me why I want a large part of my plastic boat sliding back to expose the open sea?
Now tell me why I want a large part of my plastic boat sliding back to expose the open sea?
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Re: The Journey Begins
At the Dock; There is a need to load Ice, Coolers, and remove large quantity of Tuna.
I thank you for said Honor Mr. Capt. Dave.
The Journey is coming to an end soon. I am finishing up the interior paneling, the Kicker Mount is partially completed, next up is the control mount for the kicker and finally the Dive doors. Slider?
Dave pull your boat across country next winter and we will make your boat; The Jettywolf edition. We will even get Pacific to sign off all of the mods prior to install.
I thank you for said Honor Mr. Capt. Dave.
The Journey is coming to an end soon. I am finishing up the interior paneling, the Kicker Mount is partially completed, next up is the control mount for the kicker and finally the Dive doors. Slider?
Dave pull your boat across country next winter and we will make your boat; The Jettywolf edition. We will even get Pacific to sign off all of the mods prior to install.
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate