Stabicraft 2880 Pilot House
- StabicraftMarine
- Sponsor
- Posts: 86
- Joined: Mon Apr 12, 2010 8:16 pm
- 14
- Your location: New Zealand
- Location: Invercargill, New Zealand
- Contact:
Stabicraft 2880 Pilot House
So a few have asked and more have looked so I stopped doing the boring stuff here to fill in some gaps for everyone.
We are NZ's biggest trailer boat manufacturer. Most volume is sold here in NZ, most value in Aus and fastest growing market US.
We were up to 50 on deck pre GFC and are nearly back there now. We have built from the same site for 19 years and have been doing this for just under 25 years all told.
We build on platform hulls. This hull, the 2880, shares its genetics with the 2570 hull. The difference being 3.1 feet in length.
Both can come with different cabins, Supercab, Supercab Plus (lengthened cabin) and now Pilot House.
Its worth saying we name our boats by the AYBC LOA standards in (would you believe this...) Deci-feet. A hybrid of imperial and metric. A 2880 is 28.8 feet LOA. 1850 Fisher 18.5....
Every boat is built on the same principles, rigid hull, rigid pontoon style. All aluminum. All are pressure tested and baffled for safety. We pride ourselves on being virtually unsinkable. Only the foolish and very unlucky have proved this wrong.
All boats above 15 feet are jig built and some littl'uns are too. They are built downwards from the pontoons to hull then flipped for the top sides.
All pretty simple stuff really.
I'll let some pictures fill in some more gaps. Any questions fire away.
This is the jig for the 2570 & 2880's. Here is a 2570 on the go for Australia.
Here the pontoon is being pressure tested. We test them over night.
Yes, extrusion is used in most of our boats.
Our guys get plenty of feedback from the market about their welds, I hope you enjoy them.
Coming along
The cabin height is set at 6foot 7 inches, a wee bit small for me but god for most. We set all of our 21+ Supercab cabin heights at this.
Our GIII pontoons feature an aggressive chine. They turn sharp and plane very economically. We get great feedback from those that get on them
She only has 95gallon tank. Optional for more.
And on an aside, the little black 2150 Supercab in the foreground here just won Australia's Greatest Boats with Trailer Boat. That makes three wins from three entries. The 2150 has also won NZ Trade-A-Boat's Boat of the Decade and she was first equal at NZ's premier boat show in her class.
More pictures in our folders if your looking.
Cheers,
Tim.
We are NZ's biggest trailer boat manufacturer. Most volume is sold here in NZ, most value in Aus and fastest growing market US.
We were up to 50 on deck pre GFC and are nearly back there now. We have built from the same site for 19 years and have been doing this for just under 25 years all told.
We build on platform hulls. This hull, the 2880, shares its genetics with the 2570 hull. The difference being 3.1 feet in length.
Both can come with different cabins, Supercab, Supercab Plus (lengthened cabin) and now Pilot House.
Its worth saying we name our boats by the AYBC LOA standards in (would you believe this...) Deci-feet. A hybrid of imperial and metric. A 2880 is 28.8 feet LOA. 1850 Fisher 18.5....
Every boat is built on the same principles, rigid hull, rigid pontoon style. All aluminum. All are pressure tested and baffled for safety. We pride ourselves on being virtually unsinkable. Only the foolish and very unlucky have proved this wrong.
All boats above 15 feet are jig built and some littl'uns are too. They are built downwards from the pontoons to hull then flipped for the top sides.
All pretty simple stuff really.
I'll let some pictures fill in some more gaps. Any questions fire away.
This is the jig for the 2570 & 2880's. Here is a 2570 on the go for Australia.
Here the pontoon is being pressure tested. We test them over night.
Yes, extrusion is used in most of our boats.
Our guys get plenty of feedback from the market about their welds, I hope you enjoy them.
Coming along
The cabin height is set at 6foot 7 inches, a wee bit small for me but god for most. We set all of our 21+ Supercab cabin heights at this.
Our GIII pontoons feature an aggressive chine. They turn sharp and plane very economically. We get great feedback from those that get on them
She only has 95gallon tank. Optional for more.
And on an aside, the little black 2150 Supercab in the foreground here just won Australia's Greatest Boats with Trailer Boat. That makes three wins from three entries. The 2150 has also won NZ Trade-A-Boat's Boat of the Decade and she was first equal at NZ's premier boat show in her class.
More pictures in our folders if your looking.
Cheers,
Tim.
http://www.stabicraft.com
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
-
- Doator '08, '09, '10, '11, '12, '13, '14, '15, '16, '17
- Posts: 177
- Joined: Tue Mar 24, 2009 7:12 pm
- 15
- Your location: Gulfport, Fl
Re: Stabicraft 2880 Pilot House
USA FL.
"It was the Law of the Sea, they said. Civilization ends at the waterline.
Beyond that, we all enter the food chain, and not always right at the top."
Hunter S. Thompson
Beyond that, we all enter the food chain, and not always right at the top."
Hunter S. Thompson
-
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24
- Posts: 280
- Joined: Fri Jan 11, 2008 4:38 am
- 16
- Your location: Riverview, FL
- Location: Riverview
Re: Stabicraft 2880 Pilot House
3f8
How does your boat do out in the confused chop we get in the Gulf?
How does your boat do out in the confused chop we get in the Gulf?
-
- Doator '08, '09, '10, '11, '12, '13, '14, '15, '16, '17
- Posts: 177
- Joined: Tue Mar 24, 2009 7:12 pm
- 15
- Your location: Gulfport, Fl
Re: Stabicraft 2880 Pilot House
I feel it lives up to the hype. Its a smooth dry ride. My wife has two neck fusions. She's the one who said "get this one" after she took it over a wake at 35mph on the Washington test run. I did not realize your location is St.Pete. We now home port at Gulfport Fl city marina.
"It was the Law of the Sea, they said. Civilization ends at the waterline.
Beyond that, we all enter the food chain, and not always right at the top."
Hunter S. Thompson
Beyond that, we all enter the food chain, and not always right at the top."
Hunter S. Thompson
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Re: Stabicraft 2880 Pilot House
Hopefully I can see it this coming Show in Seattle in January. it looks nice.
So Many boats to look at, ride in and fish on. My SWMBO's Pocket book will not allow me to purchase any. I need a rich wife!
So Many boats to look at, ride in and fish on. My SWMBO's Pocket book will not allow me to purchase any. I need a rich wife!
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
-
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24
- Posts: 280
- Joined: Fri Jan 11, 2008 4:38 am
- 16
- Your location: Riverview, FL
- Location: Riverview
Re: Stabicraft 2880 Pilot House
3f8
BTW, we keep our big boat at Lighthouse point.
BTW, we keep our big boat at Lighthouse point.
-
- Posts: 355
- Joined: Fri Oct 01, 2010 2:18 pm
- 13
- Your location: Bainbridge Island WA
- Location: Bainbridge Island WA
Re: Stabicraft 2880 Pilot House
Hey Tim:
Cool boat. The shape of the pilot house on the 2880 looks different that the older model I have seen, an 859, I think. I also saw some pics of a new 959. Does the 959 have the G3 pontoons? what are the dimensions (beam, deadrise, etc.) on the hull for the 959 and the 9.2? Do you have any pics of the interior of the 959?
thanks,
Mike
Cool boat. The shape of the pilot house on the 2880 looks different that the older model I have seen, an 859, I think. I also saw some pics of a new 959. Does the 959 have the G3 pontoons? what are the dimensions (beam, deadrise, etc.) on the hull for the 959 and the 9.2? Do you have any pics of the interior of the 959?
thanks,
Mike
- JETTYWOLF
- Contributor/donator/Location Nazi
- Posts: 6074
- Joined: Sun Jan 06, 2008 9:11 pm
- 16
- Your location: JACKSONVILLE FL USA
- Location: Tree-hugger, USA...they call it FLA.
Re: Stabicraft 2880 Pilot House
instead he bought a Truck that can be used for House moving, if ever the need arises. While NZ'ers are towing their boats around with Izuzu Rodeo's...........
goatram wrote:Hopefully I can see it this coming Show in Seattle in January. it looks nice.
So Many boats to look at, ride in and fish on. My SWMBO's Pocket book will not allow me to purchase any. I need a rich wife!
- StabicraftMarine
- Sponsor
- Posts: 86
- Joined: Mon Apr 12, 2010 8:16 pm
- 14
- Your location: New Zealand
- Location: Invercargill, New Zealand
- Contact:
Re: Stabicraft 2880 Pilot House
She will be two tone, blue and alloy.
No pissing around, she is almost done. end of next week it should be in a container headed home.
After today she will be spending the rest of her NZ life without her topsides. Work center 6 will line her and fit out the helm and seating before she is strapped into a container bound for the North West.
I'll get some fit out shots. We wont be rigging any of the elec's or motors. Thats up to the dealer and customer.
Yeah Mike the 2880 is vastly different to the 859. The 859 was a 'repeated' one off. As in we did more than expected but never fully integrated it in to design. Its actually been 'unsupported' by design. Im sure we would sell one if asked but we wont promote it as a production boat.Napa Mike wrote:Hey Tim:
Cool boat. The shape of the pilot house on the 2880 looks different that the older model I have seen, an 859, I think. I also saw some pics of a new 959. Does the 959 have the G3 pontoons? what are the dimensions (beam, deadrise, etc.) on the hull for the 959 and the 9.2? Do you have any pics of the interior of the 959?
thanks,
Mike
The 959 was another one-off. Its not a GIII, sort of a hybrid of GI and GIII (not GII...). It has planning strakes and softer chines. Still full ponton as all Stabi's are.
I'll see what I can find on the 959, I know she was actually 34 foot (10.4m) LOA in the end (between design and the customer she kept growing). I had specs at one stage for a magazine write up that got mothballed. I'll find them.
Cheers,
Tim.
http://www.stabicraft.com
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
- StabicraftMarine
- Sponsor
- Posts: 86
- Joined: Mon Apr 12, 2010 8:16 pm
- 14
- Your location: New Zealand
- Location: Invercargill, New Zealand
- Contact:
Re: Stabicraft 2880 Pilot House
SPEC SHEET FOR STABICRAFT 3400 OBNapa Mike wrote:Hey Tim:
Cool boat. The shape of the pilot house on the 2880 looks different that the older model I have seen, an 859, I think. I also saw some pics of a new 959. Does the 959 have the G3 pontoons? what are the dimensions (beam, deadrise, etc.) on the hull for the 959 and the 9.2? Do you have any pics of the interior of the 959?
thanks,
Mike
LOA: 10.380m / 34 feet
WATERLINE LENGTH: 8.645m / 28 feet (half load)
HULL LENGTH: 9.445m / 30 feet
BEAM (INTERNAL): 2.319m / 7.5 feet
BEAM (EXTERNAL): 2.930m / 9.5 feet
FREEBOARD: 1.143m / 3.7 feet (full load)
TOTAL POSITIVE BUOYANCY: 6390L / 1688 US gallons
TOTAL RESERVE BUOYANCY: 1860L / 491 US gallons
CHINE BEAM OVERALL: 2.412m / 7.8 feet
OVERALL HEIGHT: 3.117m / 12.1 feet
CABIN HEIGHT (INTERNAL): 2.017m / 6.6 feet
CABIN WIDTH: 2.422m / 7.5 feet (exterior)
BUNK LENGTHS: 2.094m / 6.6 feet
FUEL TANK CAPACITY: 2 x 450L / 2 X118 US gallons
FW WATER TANK CAPACITY: 150L / 39 US gallons
CONSTRUCTION SPECIFICATION
Keelson 8mm / 5/16”
Hull Bottom Stringers 6mm / 1/4”
Hull Bottom 6mm / 1/4 “
Bulkheads and Girders 5mm / 3/16”
Tubes 4mm / 1/8”
Cabin 3mm / 3/32”
Hardtop 3mm / 3/32”
Soles 4mm / 1/8”
Some shots of the interior. There are more in the Stabicraft 3400 album.
Goes alright with a pair of Yamaha F350's....
She has a decent dance floor
Like all of our Supecab's, we used curved armoured glass. Off hand I beleive this had 8mm. The veiw needs to be good when 'can' run somewhere around 50mph. The hull was desinged with twin 225's in mind to do 40mph. The Yamaha's were and after thought.
http://www.stabicraft.com
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
- StabicraftMarine
- Sponsor
- Posts: 86
- Joined: Mon Apr 12, 2010 8:16 pm
- 14
- Your location: New Zealand
- Location: Invercargill, New Zealand
- Contact:
Re: Stabicraft 2880 Pilot House
Glass is in. Visibility is good.
The cabin is nearly completely lined and the seating is away being powder coated.
She should be ready to roll next week.
Tim.
The cabin is nearly completely lined and the seating is away being powder coated.
She should be ready to roll next week.
Tim.
http://www.stabicraft.com
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
-
- Posts: 355
- Joined: Fri Oct 01, 2010 2:18 pm
- 13
- Your location: Bainbridge Island WA
- Location: Bainbridge Island WA
Re: Stabicraft 2880 Pilot House
Thanks for sharing all the pics! I'm a big fan of your boats. Hope I will get a chance to see the 2880 at Seattle.
Cheers,
Mike
Cheers,
Mike
- StabicraftMarine
- Sponsor
- Posts: 86
- Joined: Mon Apr 12, 2010 8:16 pm
- 14
- Your location: New Zealand
- Location: Invercargill, New Zealand
- Contact:
Re: Stabicraft 2880 Pilot House
Napa Mike wrote:Thanks for sharing all the pics! I'm a big fan of your boats. Hope I will get a chance to see the 2880 at Seattle.
Cheers,
Mike
No problem. I'm still a little surprised how few people mention their looks on here.
She is all done at our end, the next shot will be her driven into a 40' high side container then its all up to our dealer to get her ready for the shows.
Cheers,
Tim.
http://www.stabicraft.com
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
-
- Posts: 509
- Joined: Thu Oct 06, 2011 9:20 am
- 12
- Your location: Middle Georgia
Re: Stabicraft 2880 Pilot House
Had not seen this thread before and if I had, I would have sure cited that NW Pacific Pilothouse. Must have better pics...
I only do what the voices in the Tackle Box tell me to.
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Re: Stabicraft 2880 Pilot House
This boat at the show is stuck into the corner. A little difficult to get side and back views of it. What I will do is ask the Stability rep to post pictures of it next week when the show is over and it is back north in the dealers yard.
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
- StabicraftMarine
- Sponsor
- Posts: 86
- Joined: Mon Apr 12, 2010 8:16 pm
- 14
- Your location: New Zealand
- Location: Invercargill, New Zealand
- Contact:
Re: Stabicraft 2880 Pilot House
The internet hates me again. Jettywolf (or Welder), you know, what did I do wrong below?
I am trying to add a video like you do, just the video box, not a silly link.
http://youtu.be/zDCs0-z_Mv0
https://www.youtube.com/watch?v=zDCs0-z_Mv0
%3Ciframe%20width=%22640%22%20height=%22360%22%20src=%22http%3A//www.youtube.com/embed/zDCs0-z_Mv0?rel=0%22%20frameborder=%220%22%20allowfullscreen%3E%3C/iframe%3E
This is the URL link to our second 2880 Pilot House to hit the States.
https://www.youtube.com/watch?v=zDCs0-z_Mv0
I'll come back and edit this if anyone gives me the know-how.
Cheers,
Tim.
I am trying to add a video like you do, just the video box, not a silly link.
http://youtu.be/zDCs0-z_Mv0
https://www.youtube.com/watch?v=zDCs0-z_Mv0
%3Ciframe%20width=%22640%22%20height=%22360%22%20src=%22http%3A//www.youtube.com/embed/zDCs0-z_Mv0?rel=0%22%20frameborder=%220%22%20allowfullscreen%3E%3C/iframe%3E
This is the URL link to our second 2880 Pilot House to hit the States.
https://www.youtube.com/watch?v=zDCs0-z_Mv0
I'll come back and edit this if anyone gives me the know-how.
Cheers,
Tim.
http://www.stabicraft.com
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
Re: Stabicraft 2880 Pilot House
And I saw this one pop up in Everett... Will it be at the show?
http://www.boatcountry.com/pre_owned_de ... 57917&nv=y
http://www.boatcountry.com/pre_owned_de ... 57917&nv=y
- StabicraftMarine
- Sponsor
- Posts: 86
- Joined: Mon Apr 12, 2010 8:16 pm
- 14
- Your location: New Zealand
- Location: Invercargill, New Zealand
- Contact:
Re: Stabicraft 2880 Pilot House
Sure will be. I'm not sure if the yellow 2880 will be there as it is a sold (customer owned) boat.Chtucker wrote:And I saw this one pop up in Everett... Will it be at the show?
http://www.boatcountry.com/pre_owned_de ... 57917&nv=y
We did a few things different on the grey one, the transom set up is quite different. I'll be interested in seeing the eventual 'Seattle Boat Show picture thread' and hearing some thoughts on it.
Tim.
http://www.stabicraft.com
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
Re: Stabicraft 2880 Pilot House
I think the blue one that was down in Oregon finally sold. It appeared to be a great deal for someone.
Did either of them have a stand up head?
See you at the show
Did either of them have a stand up head?
See you at the show
- StabicraftMarine
- Sponsor
- Posts: 86
- Joined: Mon Apr 12, 2010 8:16 pm
- 14
- Your location: New Zealand
- Location: Invercargill, New Zealand
- Contact:
Re: Stabicraft 2880 Pilot House
No, neither had a stand up head. We have done them but they are not popular down under.
Another forum member (DwayneJ) has one on his 829 GIII.
I personally wont be at the show, I go to the Aus and NZ shows but our MD (and founder) goes to Seattle. He will be there for the last couple of days supporting our US sales manager and our dealers.
I hope to come over one day. Its a big trip but I'd like to meet some of you as well as have a proper look at some PNW style boats. They are so different to the 'NZ norm', I'd like to know why.
Cheers,
Tim.
Another forum member (DwayneJ) has one on his 829 GIII.
I personally wont be at the show, I go to the Aus and NZ shows but our MD (and founder) goes to Seattle. He will be there for the last couple of days supporting our US sales manager and our dealers.
I hope to come over one day. Its a big trip but I'd like to meet some of you as well as have a proper look at some PNW style boats. They are so different to the 'NZ norm', I'd like to know why.
Cheers,
Tim.
http://www.stabicraft.com
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
-
- Contributor/Donator '08
- Posts: 1205
- Joined: Sat Jan 12, 2008 4:38 pm
- 16
- Location: Orange County
Re: Stabicraft 2880 Pilot House
http://www.youtube.com/watch?v=zDCs0-z_Mv0
Hey Mate. Yes youtube can be a bit perplexing, here is what I did?????
Right clicked on your video. Copy and pasted URL.................... https://www.youtube.com/watch?v=zDCs0-z ... detailpage
Clicked youtube box
Exactly between the [Youtube]https://www.youtube.com/watch?v=zDCs0-z ... ge[Youtube] ....... Pasted copied URL
Removed the s in https.... http://www.youtube.com
Removed the Et (could not type the exact symbol) in total removed..... Etfeature=player_detailpage
So it looked kind of looked like this........ [youtube]http://www.youtube.com/watch?v=zDCs0-z[youtube]
For you Observant ones I just ommited the slash in youtube to not activate the source code.
Well it worked for me.............. look forward in seeing more embedded youtubes from you in the future
Hey Mate. Yes youtube can be a bit perplexing, here is what I did?????
Right clicked on your video. Copy and pasted URL.................... https://www.youtube.com/watch?v=zDCs0-z ... detailpage
Clicked youtube box
Exactly between the [Youtube]https://www.youtube.com/watch?v=zDCs0-z ... ge[Youtube] ....... Pasted copied URL
Removed the s in https.... http://www.youtube.com
Removed the Et (could not type the exact symbol) in total removed..... Etfeature=player_detailpage
So it looked kind of looked like this........ [youtube]http://www.youtube.com/watch?v=zDCs0-z[youtube]
For you Observant ones I just ommited the slash in youtube to not activate the source code.
Well it worked for me.............. look forward in seeing more embedded youtubes from you in the future
Mark
2325 WA PACIFICSKIFF
2325 WA PACIFICSKIFF
Re: Stabicraft 2880 Pilot House
I called on that one a couple of days ago (1/31). He gave me the quote so I assume it's still for sale but I just don't have the time right at the minute to drive down and take a look. I'm really liking the idea of these boats especially the 2880.Chtucker wrote:I think the blue one that was down in Oregon finally sold. It appeared to be a great deal for someone.
Did either of them have a stand up head?
See you at the show
Here's a question:
I know Stabicraft is made in New Zealand. I understand there is some assembly here in the US. Does that make it a US vessel? The reason I ask is in the back of my head I might want to retire in a few years so I was thinking of trying to set up my play boat as commercial tuna. Not serious or with the intent to make money but with the intent of trying to defer some of the costs (fuel).
- StabicraftMarine
- Sponsor
- Posts: 86
- Joined: Mon Apr 12, 2010 8:16 pm
- 14
- Your location: New Zealand
- Location: Invercargill, New Zealand
- Contact:
Re: Stabicraft 2880 Pilot House
The assembly on these hulls is minimal - effectively just the roof and windows are fitted after its pulled from the container. I do not believe this qualifies the hull as US made in any significant way. We had a partnership in the US years ago and are looking very hard at them again (the current exchange rate is murder). If we do get something under way its likely we will send sub-assemblies to the US for construction and fit up locally which would make them predominantly US built. You guys would hear about it as soon as I knew we had something happening.Kimbrey wrote: Here's a question:
I know Stabicraft is made in New Zealand. I understand there is some assembly here in the US. Does that make it a US vessel? The reason I ask is in the back of my head I might want to retire in a few years so I was thinking of trying to set up my play boat as commercial tuna. Not serious or with the intent to make money but with the intent of trying to defer some of the costs (fuel).
I hear what you are saying about having a commercial element to your future boat. It is not uncommon practice to do that here.
Tim.
http://www.stabicraft.com
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
For your nearest dealer...
888 GO STABI (USA)
1800 178 224 (AUS)
0800 478 224 (NZ)
For the Invercargill, NZ factory - 0064 3 2111 828
-
- Donator '13
- Posts: 14
- Joined: Tue Mar 12, 2013 7:42 pm
- 11
- Your location: Serbia, Belgrade
Re: Stabicraft 2880 Pilot House
Only one thing I don't like about the Stabicraft...I don't own one....
Being from Australia originally, you guys make some awesome boats across the ditch...had the pleasure of going out on a spearfishing trip out at the Sydney FAD's for Mahi Mahi on one of your boats...Well, love at first sight... and the ride was something special....Keep it up...
Being from Australia originally, you guys make some awesome boats across the ditch...had the pleasure of going out on a spearfishing trip out at the Sydney FAD's for Mahi Mahi on one of your boats...Well, love at first sight... and the ride was something special....Keep it up...